How to extend the service life of LED explosion-proof lamps under the sun
In a few places where explosion-proof lamps are required, due to the adjustment of plant equipment or changes in plant equipment, the explosion-proof lamps are exposed to the sun for a long time. Will there be any disadvantages?
The LED explosion-proof lamp is exposed to the sun for a long time, which has no effect on its explosion-proof ability, but this will aggravate the aging of the LED explosion-proof lamp and reduce the life of the explosion-proof lamp. Explosion-proof lamps generally have requirements for ambient temperature. If the ambient temperature is too high, at the same time, the explosion-proof lamp itself generates a large amount of heat, which cannot be released for a long time. It is fixed around the explosion-proof lamp, which will double the aging of the explosion-proof lamp.
Explosion-proof lights
The fasteners of the LED explosion-proof light are made of stainless steel. These materials have the ability to expand and contract with heat. Long-term extension makes the screws and the rib close to each other. The explosion-proof light fixtures are made of other rusty materials, which are very easy Rust spots are formed, and it is not easy to disassemble when repairing later.
In addition, whether it is an LED explosion-proof lamp or an ordinary lamp, the applied wires and the rubber on the surface will also lose their own characteristics if they are exposed to high temperature for a long time, and they are easy to be tough and broken. would be very dangerous.
Therefore, it is very good to use explosion-proof lamps in workshops. Do not expose them to direct sunlight. Frequent maintenance and repair of explosion-proof lamps and frequent replacement of explosion-proof lamps require money. Of course very important is safety.
