How to improve the quality of LED purification lamps is how to dissipate heat!
Any product that is connected to electricity will definitely generate heat. If the heat removal is not good, it will affect the electronic circuit board of the product, etc. The lighting product will heat up immediately when it comes into contact with electricity. Therefore, the heat dissipation of LED lamps is a very important part. Whether the LED light is not messy, the quality of the light is very important to the heat dissipation of the lamp body itself. At present, the heat dissipation of high-brightness LED lamps on the market usually adopts natural heat dissipation, and the effect is not ideal. If the heat dissipation is not ideal, the life of the lamp itself will also be affected.
The industry's application of heat dissipation materials should not only focus on the heat dissipation coefficient, but ignore the thermal resistance value. If you only see a certain heat dissipation patch, heat dissipation paste, heat dissipation paint or thermal conductive film with a good heat dissipation coefficient, you may be disappointed if you think that high heat can be conducted out. It is expected that the temperature will drop, the LED epitaxy will not decay due to overheating, the life of the street lamp can be effectively extended, and the acceptance will be passed smoothly. It may not happen.
Etching and applying tin from the substrate circuit, coating LED backlight ink, applying protective adhesive film, baking in the oven, leveling the whole board, pasting the thermal conductive adhesive film, and then combining the heat dissipation module with adhesive or locks, this is a cumbersome process. It can be found that the material with the best thermal conductivity will also be defeated by the thermal resistance. Air, non-adherent pores at joints, heat dissipation pads, powder formed by the volatilization of heat dissipation paste silicone oil, and film thickness of multi-layer thermally conductive adhesive films will form thermal impedance. These multi-layer thermal resistances will hinder the heat conduction rate, and the heat conduction is very slow, and even cannot be conducted to the surface of the lamp, and the heat will continue to accumulate and increase. The white backlight ink on the surface of the aluminum substrate must not only reflect, but also radiate the heat of the lower layer through the backlight ink on the surface.
Some manufacturers ignore it and replace the LED-specific backlight ink with ordinary white text ink, which is equivalent to adding a layer of hard paint to seal the heat. After many failures, some manufacturers have accepted new concepts and processes, focusing on the overall cooling scheme. The aluminum substrate is coated with LED-specific heat-dissipating white backlight ink. If a slightly yellow backlight ink is specified, the reflectivity will be enhanced to 91%. The soft ceramic heat-dissipating paint is sprayed between the copper foil substrate and the aluminum substrate, which can reduce the use of Japanese thermal conductive adhesive film and improve the breakdown voltage at a very low cost.
To protect lamps and lanterns from weather and environmental corrosion, and effectively conduct heat out, a cost-saving and effective method is to spray soft ceramic heat dissipation paint. Only starting from the overall heat dissipation concept and reducing thermal resistance interference is the key to the acceptance of large LED lamps. The protective shell of the lamp should abandon traditional electroplating or baking paint, which will seal the heat back into the lamp.
Doing a good job of its heat dissipation function will definitely help this product, and it will also increase the hot spots. The purification lamp technology can accurately achieve its due functions, and it can also help environmental protection.
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry， our web: 
https://www.benweilight.com/.
