How to install T8 tube?
The induction lamp manufacturer will answer for you: LED lamps have always been popular with consumers, and LED lamps also have different lamps, such as T5 or T8, so how to install T8 lamps?
1. Whether you choose a T5 or T8 LED tube, the installation method is similar. All tools need to be prepared, including screwdrivers, and wire pliers, including nuts, and spare T8 fluorescent lamps. First remove the original fluorescent lamp, then replace it with this new Led lamp, at the same time remove the ballast and remove the original wire.
2. Then use the nut to connect the wire of the lamp to the circuit. Note that the wire connection should be accurate and the color should be consistent. For example, the black should be connected with the black, and then the lamps should be attached to the ceiling, and then fixed with screws. Then power on and restore the power. If there is no problem, the installation is successful.
3. The wiring method of this LED tube is also relatively simple, because its two ends are connected to the wire, one end can be connected to the live wire, and the other end can be connected to the neutral wire, but the live wire and the neutral wire cannot be connected to one end. Otherwise, short-circuit problems are prone to occur.
