Microwave induction LED fluorescent lamps should be composed of five parts: high-quality LED chips, low-voltage constant-current isolated power supply, suitable radiator relative to the lamp power, light diffusion effect is soft and no point light source lampshade and radar sensing sensitivity.
1: The LED chip is very important:
A good LED chip has high luminous efficiency, low temperature rise, high color rendering index, high junction temperature, and antistatic. The most critical point is that the induction sensitivity is not high. Heat dissipation is very important: If you insist that LEDs are cold light sources and do not need heat dissipation, it is a complete mistake. Before the development of truly low-heat LED chips, if LEDs do not add high-quality heat sinks, their lifespan may not be as long as The current ordinary energy-saving lamps! Because the light decays to 70% of the initial luminous flux, it has already marked the end of the life of the LED energy-saving lamps.
2: Power is important: microwave induction LED fluorescent lamps
Whether it can withstand high temperature and high humidity, whether it can withstand high-voltage safety regulations (UL), whether it can withstand electromagnetic compatibility (EMC/EMI), are also hard indicators, which also determine the real life of LED energy-saving lamps. In the barrel effect, The power supply may be the short board of radar-sensing LED fluorescent lamps. What kind of capacitor is used, electric cathode, and whether there is a smart IC.
3: The heat dissipation aluminum tube is also important:
Generally, the wall thickness of the conventional aluminum tubes with a three-year warranty is about 0.5-0.8mm, the oval space is large, and the heat dissipation effect is relatively better. The material of aluminum is also very important, and some are pure aluminum heat dissipation. The thermal conductivity is very high, up to 1.2. Inferior ones contain a lot of impurities. The heat dissipation is poor, resulting in a coefficient of only 0.7.
4: The lampshade is critical:
The lampshade is the secondary light distribution of LED energy-saving lamps. Currently, there are no lampshade, transparent lampshade, frosted lampshade, milky white lampshade, and light diffusion lampshade. No lampshade and transparent lampshade, no secondary light distribution, visible LEDs, multiple LEDs means multiple light sources, direct viewing is dazzling, and the object is irradiated. When the frosted lampshade is lit, the LED light source can be seen, and the object is partially blurred. The milky white lampshade is lit and the LED light source is invisible but the light transmittance is low. High-quality LED energy-saving lamps generally use light diffusing materials. When the LED light reaches the lampshade, the light is diffused, and the LED light source cannot be seen after lighting. The LED energy-saving lamp becomes a large light source. The light transmittance of the lampshade is generally above 80%, and the effect is good. 5: Is the induction sensitivity enough:
Some induction lamps are not sensitive enough, and people can only sense when they come down to the lamp. Generally, induction lamps must be able to sense before they are far away from the lamp.
First, it can be installed by inlaying, inlaying, to be more specific, it is actually a very good choice on the ceiling, wall and other places, such as the surface of an installation problem, and it is installed. The method is very similar to other household chandeliers. You only need to ensure that it can be installed very firmly during installation and will not fall off the wall. Others, after installing it, not only can illuminate the room , make your small home more warm, and the most important thing is that it can also exist in this room as a decoration, so that you can kill two birds with one stone.
Second, the installation method of inlay is not very in line with the method of ordinary chandeliers. The hanging method is actually more of a method of installation of chandeliers. Panel lights, like flat lights, can be hung on the ceiling. This method is especially The ceiling at home is white, and the natural feeling is really very beautiful.
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry， our web: https://www.benweilight.com/.
