How to replace ordinary fluorescent lamps with led fluorescent lamps
Consider from two aspects
1. Installation method: for inductive ballast, remove the starter and replace the led tube directly
The electronic ballast needs to be modified, one end of the bracket has a neutral wire, and the other end is a live wire.
However, Benwei also has LED tubes compatible with electronic ballasts, which can also be directly replaced.
2. Corresponding power selection: mainly depends on the luminous efficiency of the led tube
Most of the luminous efficiency on the market is 70-80lm/w, and the power should be slightly larger for the brightness to be enough. For example, 20w fluorescent lamp corresponds to 10w led fluorescent lamp, and 40w fluorescent lamp corresponds to 18w led fluorescent lamp.
The LED fluorescent lighting effect of Langte reaches 95-100lm/w, the power can be lower, and the brightness is enough. 20w uses 8wled fluorescent lamp instead, 40w uses 16wled fluorescent lamp, more energy-saving
Remember: whether the car is driving well or not depends on fuel consumption;
Whether the led tube is good or not, the key depends on the light effect
