How to use LED light correctly Five rules for maintenance and cleaning of LED light!
LED light have the advantages of long service life, energy saving, and high photoelectric conversion rate. Therefore, LED light are one of the light that many friends must choose for decoration. However, unreasonable use, maintenance and cleaning methods will also greatly reduce the advantages of LED light. Therefore, for LED light, we must not only be able to buy, but also use, and even maintain!
How to use LED light correctly, five rules for maintenance and cleaning of LED light
First, after buying back the LED light, do not rush to install it first, you should carefully read the marking of the LED light and read the installation and use instructions, and then install and use the LED light according to the instructions, otherwise there may be danger;
Second, replace the aging light in time according to the light source parameters provided by the sign. If it is found that the two ends of the light are red, the light is black or has shadows, and the light does not turn on, the light should be replaced in time to prevent the occurrence of ballast. Unsafe phenomena such as burnout of the device;
Third, during cleaning and maintenance, you should be careful not to change the structure of the LED light, and do not replace the components of the LED light. ;
Fourth, LED lights need to be maintained in use to prolong their service life. The light in the room should be wiped with dry cloth frequently, and attention should be paid to prevent moisture intrusion, so as to avoid rust damage or leakage and short circuit for a long time; light installed in toilets and bathrooms must be equipped with moisture-proof lighthades, otherwise the service life will be greatly shortened; light installed in the kitchen should pay special attention to preventing oil fume, because the accumulation of grease will affect the illumination of the light; the light-colored lighthade has better light transmittance, but it is easy to stick to dust, so it should be wiped diligently to avoid affecting the light penetration; If the LED light is non-metal, it can be wiped with a damp cloth to avoid dust accumulation and hinder the lighting effect;
Fifth, try not to switch on and off frequently when using LED lights, because the current through the filament is greater than the current during normal operation at the moment when the LED lights are frequently started, so that the temperature of the filament rises sharply and accelerates the sublimation, which will greatly reduce its use. life, so try to minimize the switching of LED lights.
It should be noted that a humid environment can easily lead to rust, paint peeling, and shorten the service life of LED lights. Therefore, moisture-proof is the key to lighting maintenance, especially LED lights in bathrooms, bathrooms and kitchen stove headlights, moisture-proof lighthades should be installed to prevent moisture intrusion, rust damage or leakage short circuit. Therefore, it is best not to clean the LED light with water, just wipe it with a dry cloth and water. If you accidentally touch the water, try to dry it as much as possible. Do not wipe it with a wet cloth immediately after turning on the light.
Shenzhen Benwei Lighting Technology Co., Ltd is a professional manufacturer in producing LED lighting products, Our main products T8 T5 LED Tube, LED Grow Light,Poultry LED Light,Tri-proof LED Light,LED Flood Light, LED Panel, LED Stadium Light, LED High Bay, LED Classing Room Light ,If you want to purchase a high-quality LED lighting products or have a more in-depth understanding of the application of LED lighting, please contact send us inquiry.
