LED lights! School Lighting System Requirements
In recent years, it is often emphasized to provide a good learning environment for all students. However, in addition to the best computers, teaching aids and teaching materials, a good environment is closely related to the daily life of students, but the school lighting LED lighting equipment is often ignored.
Students are in the classroom for at least 7-8 hours a day. The lighting on their heads directly affects their eyestrain and indirectly affects their performance in class. If students feel sleepy all the time, or they are not too lazy , but the classroom lighting is not for them! School lighting is very knowledgeable in terms of luminosity, placement orientation and even color:
1. Photometric aspects
For schools that focus on daytime classes, when there is sunshine, the school lighting should be based on natural lighting as much as possible. The lighting in the classroom only needs to make up for the lack of natural light, so that the luminosity of the entire classroom is evenly balanced, with 4000k-6500k fluorescent lamps. Tubes are more suitable.
2. Placement
It should be avoided to place it horizontally with the direction of the blackboard, because this will cause the light to directly enter the eyes. When the blackboard reflects glare or other large contrast of brightness, students will easily feel dazzling or eye fatigue, which will affect their concentration. force.
In the school corridor, it is necessary to install ordinary LED lights and LED emergency lights, which are installed in a proportional arrangement. It is common to use a one-to-one-row method, with one ordinary LED light and one LED emergency lighting; sometimes five-to-one row is used. method, five ordinary LED lights and one LED emergency light.
3. Reduce costs
Why do we want to promote the use of LED lights in school lighting? Because LED lights have amazing benefits in terms of energy saving, economic benefits and practical effects.
Waterproof LED square ceiling light is more cost-effective, safer and more energy-saving than traditional butterfly tubes. With the development of LED lights, fewer and fewer factories manufacture butterfly tubes, casings and accessories, and the quality is getting worse and worse. When the butterfly tubes are worn out or worn out, the maintenance costs are not only high, but also the casing and accessories may not be available. repair. In addition to the long life and low energy consumption of Melite LED lights, LED lights are also very easy to repair. All housings and accessories can be purchased online. Of course, LED lights are best checked and repaired by professionals.
4. Improve security
The brightness of LED lights can be adjusted according to different locations on the campus, and the application is flexible. It can also achieve very good uniformity, reduce glare and shadows caused by direct light hitting the blackboard, and make the vision clearer. Moreover, the LED light can be built-in with sensor and remote management (traditional light is difficult to do), in case of need for maintenance, it can be repaired quickly, reducing the time of operation interruption.
According to the Fire Services Ordinance, in the event of a power outage, buildings in Hong Kong generally require two hours of lighting power; while schools, hospitals, hotels and cinemas generally require three hours of lighting power. The emergency lighting provided by Melite has been certified by the Polytechnic University as a fire protection product. It is equipped with a backup emergency battery, which can activate the LED light immediately when the power supply is interrupted, and maintain the lighting power for three hours.
5. Sustainability
LED lights are green and environmentally friendly lighting. In addition to the previously mentioned low energy consumption, which can effectively reduce carbon emissions and reduce carbon footprint, it can also recycle waste and reduce pollution caused by discarding.
BENWEI is a professional team that provides one-stop school lighting system solution services. After understanding the different needs of each school, a registered engineer will visit the site to inspect the site, and then tailor the system and structure for the school to suit them, in order to ensure safety. , under the premise of energy saving and high efficiency, to provide the school with the greatest efficiency system.
