1. The LED lamp does not contain mercury (Hg), lead (Pb), and can be recycled.
2. For each kWh of electricity used by traditional lighting fixtures, the carbon dioxide content emitted is about 0.62 kg. If LED lamps and lanterns are used, it can reduce carbon dioxide emissions by 0.62 kg × 68% = 0.42 kg, which plays a vital role in environmental protection.
3. Low energy consumption
For example, a set of general 60cm grille lights consists of three 20W lamps and three 5W ballasts, with a total power of 75W. But if you choose LED lights: to achieve the same effect, only three 8W lamps are needed, and no ballast is needed, and the total power is 24W. According to the test, it is actually less than 24W. For comparison, each set of grille lights saves 75W-24W=51W of power, which is suitable for saving 68% of electricity. If the company's monthly lighting electricity bill is about 50,000 yuan, then the use of LED lamps can save about 30,000 yuan in electricity bills per month. It can be seen that the power saving effect is still quite obvious.
4. High-brightness lighting: An 8W LED lamp is brighter than a 20W traditional fluorescent lamp. This is well-founded, and field data test comparisons can be made.
5. Ultra-high service life: The service life of general fluorescent lamps is short, ranging from about 3000-5000 hours. The service life of LED lamps is more than 30,000 hours, which is suitable for 10 times the life of ordinary lamps.
6. Wide starting: The starting voltage of the LED light is 90V-260V can be started. For traditional fluorescent lamps, if the voltage is too low, the lamps cannot be started normally.
7. No delay in response: The response time of LED lights is in nanoseconds. There is no need to wait for the lights to be turned on. In general, when the fluorescent lamp is turned on, there is a delay process, and if it is switched on and off frequently, it will also cause damage to the lamp.
8. LED lights are noise-free: LED lights do not make noise, quiet and comfortable.
9. LED lights have no stroboscopic: Generally, fluorescent lamps use alternating current, so 100-200 stroboscopic flashes occur per second. The LED light directly converts alternating current into direct current, without stroboscopic phenomenon, protects the eyes, and obtains a "soft" lighting environment.
10. Consolidation of raw materials for lamps: The traditional fluorescent lamps are basically made of glass raw materials, which are fragile and risky. The LED lights are all made of high-grade engineering plastics and aluminum alloys, built-in semiconductor chips to emit light, no filament, no glass bubbles, not afraid of vibration, not easy to break, and safe to use.
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry， our web: https://www.benweilight.com/.
