Requirements and benefits of 1.2m LED fluorescent lamp without flicker for school
The requirements and benefits of non-flicker 1.2m led fluorescent lamp for school use, Benwei company develops 1.2m led fluorescent lamp for school professionally. Aiming at the light health and problems of students, this fluorescent lamp is specially developed, divided into two series. T8 split 1.2m led fluorescent lamp and integrated 1.2m led fluorescent lamp. How to choose? Will be explained separately.
The school has no strobe 1.2m led fluorescent lamp product parameters:
Model: LT-T8-120-16W
Power: 16W
Size: 1200mm(length)*26mm(width)
Light source: SMD2835 lamp beads single 0.2w 60ma luminous efficiency up to 180lm/W
Number of LED lights: 120
Illumination requirements: fully meet the national illuminance requirements.
Beam angle: 120°
Lamp holder: G13
Input voltage: AC 85-264V
Luminous flux: 1600lm-1800lm-2100lm according to customer requirements
Color temperature: warm white / normal white / cool white, it is generally better to use 6000k color temperature, especially in the south.
Appearance: Milky white/transparent/stripe. Milky white is better and the light is softer. Transparent and dazzling.
Power factor: ≥0.97
Power frequency: 50-60Hz
Material: PBI+PC+Aluminum substrate
Lifespan: 50000 hours
Frequency of led fluorescent lamp: greater than 100HZ. There is no flicker at all, and it is professionally aimed at schools and scientific research institutions to protect eyesight.
School no-flicker 1.2m led fluorescent lamp product features: 1. Adopt multiple anti-stroboscopic technology to completely solve the problem of anti-stroboscopic, even using a high-pixel camera can ensure that the invisible stroboscopic is normal, and truly no stroboscopic Protection level.
2. The PC outer tube is produced by German BAYER mold pellets, and the tube wall is guaranteed to have the advantages of high light transmission, UV resistance, and impact resistance.
3. The power supply circuit board adopts double-sided board, which has the characteristics of low water absorption, excellent moisture resistance, not easy to break, and not easy to deform.
4. Using imported LED light-emitting diode chips, low light attenuation, to ensure that the electrical performance of the LED does not change, so that the LED can achieve high stability and long service life.
5. Built-in drive power: soft and pure lighting, electromagnetic compatibility design, achieve green environmental protection. Excellent constant current circuit, wide voltage operation, no interference from the power grid, to ensure uniform and stable light emission of the fluorescent tube without flicker. Low electrode consumption and obvious energy saving.
The advantages of the school 1.2m LED fluorescent lamp:
1. Comparison of high efficiency and energy saving: Under the same brightness, LED energy-saving fluorescent lamps consume only 1 kWh of electricity in 1000 hours, ordinary incandescent lamps consume 1 kWh of electricity in 17 hours, and ordinary energy-saving lamps consume 1 kWh of electricity in 100 hours.
2. Ultra-long life: The theoretical life of LED energy-saving lamps can reach more than 50,000 hours, and the life of ordinary incandescent lamps is more than 1,000 hours. Depends on the choice of materials.
3. Healthy light: The light does not contain ultraviolet and infrared rays, no radiation, and no pollution. Ordinary energy-saving lamps and incandescent light rays contain ultraviolet and infrared rays.
4. Green and environmental protection: it does not contain harmful heavy metals, can be recycled and used, does not produce electromagnetic interference, ordinary fluorescent lights flicker, and the ballast is noisy. Electronic ballasts can cause electromagnetic interference.
5. Protect eyesight: DC drive, no stroboscopic, ordinary lights are AC drive, stroboscopic is not good for the eyes. The led color rendering index is high, and the colors under the light are bright and lifelike. There is no fatigue in the eyes.
6. High luminous efficiency: low heat generation, power conversion efficiency of 0.9 is visible light, luminous efficiency over 100lm/w: the power of the whole lamp can be made small, the illuminance of the light is unchanged, and high efficiency and energy saving.
7. Safety factor: low power required, low heat generation, safety and reliability, and the corresponding power distribution equipment requirements are reduced. The cost of the lighting system is reduced.
The use range of 1.2m led fluorescent lamp in school
Scope of application: government lighting engineering renovation, institutional lighting engineering renovation, factory lighting engineering renovation, school lighting engineering renovation, banks and other places that require long hours of lighting every day, a lot of paperwork, and high lighting requirements;
Installation requirements and maintenance
1. Product installation must be carried out by professionals. Dai Zheng on duty
2. The power supply must be cut off before installation to confirm whether the rated voltage (220v or 110v) is correct. Please do not operate with electricity.
3. Make sure that the product is installed firmly and the wiring is correct before turning on the power.
4. The product should not be used if the shell is deformed or the material is damaged.
5. In the event of failure, it should be sent to our company for repair, and must not be disassembled by yourself.
Notes for school 1.2m led fluorescent lamp:
Switch the LED fluorescent lamp on time, and don't switch the power of the fluorescent lamp frequently to reduce the current impact. So as not to affect the life span.
Before installation, make sure that the installation location can bear 5 times the weight of the product. There is no vibration or swing after installation.
When the control system is used under normal working conditions, the optimal LED life can be achieved, and beyond these ranges, the life of the LED will be further reduced. Therefore, it is strictly forbidden to replace any lamp fittings without permission. If they do not match, the internal light source assembly will malfunction.
Recommendations for choosing led fluorescent lamps: when new installations, it is better to use an integrated 1.2m led fluorescent lamp, which saves brackets, is easy to install, and reduces costs.
When replacing, the original fluorescent lamp bracket is common, but it needs to be modified. Ensure that one end of the neutral wire, one end of the live wire is safe, no short circuit, it can be bright when power is on.
Try to use 1.2m led fluorescent lamp, because this model has a large light-emitting angle, which is convenient for large-area lighting. T5 LED fluorescent lamp is slightly inferior to T8 fluorescent lamp.
