T5 LED tube replacement T5 fluorescent lamp specifications installation and replacement knowledge
t5 LED tube light is one of the most widely used fluorescent lamps, except for the large amount of T8led fluorescent lamp. The amount of T5 LED tube is also large, which is used to replace the traditional T5 fluorescent lamp, with the rapid development of the LED fluorescent lamp industry. There are more and more styles and functions of T5 LED fluorescent tubes, which are faster to update and less knowledgeable. Langte is willing to share professional knowledge for your reference. Langte Company specializes in the production of t5 LED tube lights. The following is a comprehensive introduction to some professional knowledge about the price, specifications, installation, and replacement of T5 LED tubes from seven.
1. What is the difference between LED fluorescent lamp t5 tube and t8 tube?
The difference between a t5 lamp and a t8 lamp, the meaning of "T" actually represents the diameter of the lamp, and the value after T represents the circumference of the lamp. For example, the model T5 fluorescent tube has a circumference of 8cm, and the T8 fluorescent tube has a circumference of 8cm. There are many specifications and models of LED fluorescent tubes, mainly including: T5, T8, T10, etc. Regarding the issue of "T" representing the circumference mentioned above, a T is approximately equal to 3.175mm. Taking T8 as an example, according to the British system, the general rule that the diameter of the lamp is 1/8, 1 represents 1/8 inch, and T8 is exactly one inch. An inch is equal to 25.4 millimeters. Then the diameter of the T8 tube is 25.4mm. By analogy, the remaining numbers correspond to the following: T5 is 5/8 inch, diameter 16mm, T10 is 5/4 inch, diameter 31.8mm. At present, all three types of led tubes can be produced.
2. What is the international standard for each length of lamp T5?
0.6m power 14w specific size 549
0.6m power 16w specific size 589
0.9m power 21w specific size 849
0.9m power 24w specific size 894
1.2m power 28w specific size 1149
1.2m power 32w specific size 1199
1.5m power 35w specific size 1449
3. How to replace T5 fluorescent lamp with T5 LED fluorescent tube according to the power
0.6m power 14w corresponding to t5 LED tube light 7W
0.6m power 16w corresponding to t5 LED tube light 8w
0.9m power 21w corresponding to t5 LED tube light 10w
0.9m power 24w corresponding to 12w t5 LED tube light
1.2m power 28w corresponding to 13w t5 LED tube light
1.2m power 32w corresponding to 15w t5 LED tube light
1.5m power 35w corresponding to t5 LED tube light 18w
If high-efficiency T5 LED tubes are used, the corresponding power can also be reduced. Mainly take the luminous flux as the standard, and the power as the reference. High-quality T5 LED fluorescent tubes have better energy-saving effects. It should have high luminous efficiency, and its power consumption is much lower than that of ordinary T5 LED tubes.
4. the classification of t5 LED tube lights?
T5 LED tubes are roughly divided into two categories
The first category: split T5 LED fluorescent tubes, varying in length, plug G5, diameter 16, mainly used to replace traditional glass T5 fluorescent lamps
The second category: integrated T5 LED fluorescent tubes, with different lengths, equipped with plugs and buckles, which will light up when power is on. It is mainly used for new installation, reducing lamp holders and reducing costs.
5. What is the difference between T5 integrated LED tube and T5 split?
Integration means that the T5 tube has been installed on the bracket, and it is easy to install. This is the more common way for T5 now (mainly because T5 is too small). The split is to separate the bracket and the lamp tube. There are also two types. One is that the lamp driver has been installed in the lamp tube. The bracket can be more general, that is to say, the lamp tube and the driver can be purchased separately. Like the traditional fluorescent lamp, the other is that the driver is installed in the bracket, that is, the bracket and the lamp tube must be used together. This kind of bracket lamp tube is integrated, and the heat dissipation is better.
6. How to replace T5 LED fluorescent tube?
Now the integration of LEDt5 lamps on the market will be equipped with circlips and connectors, just connect to 220V directly.
The installation of the split body is a bit more troublesome. If the power supply is built-in and the bracket is with a starter, you can remove the starter, but you need a good quality tube. The voltage resistance of the Langte T5 LED tube is as high as 305v, and it can be directly replaced. . If the bracket is an electronic ballast, the bracket needs to be modified, the ballast is removed, and one end is a neutral wire and the other is a live wire.
Reminder: Power off operation. Before turning on the power, carefully check whether there are any abnormalities such as short circuit and aging of the power cord.
7. the price of t5 LED tube light is more sensitive, so how to choose it is very important. Choosing cost-effective lamps is cost-effective. Don't choose the one that is too cheap, it is not safe and easy to break. Too expensive, generally can't afford to use, not cost-effective. It is the most cost-effective to choose the same price T5 LED tube. Langte brand t5 LED tube light is your best choice.
