T8/T10 LED fluorescent lamp parameters
T8 /T10 1.5m SMD LED fluorescent lamp
Features
1. Energy saving:
a, 80% energy saving than traditional fluorescent lamps, 90% energy saving than incandescent lamps;
b. 15W LED fluorescent lamp is equivalent to 40W traditional fluorescent light flux, equivalent to 150W incandescent light flux.
c. Under the same luminous flux, the effective illuminance of LED is twice that of traditional fluorescent lamp. (Reason: LED emits light in one direction, while traditional fluorescent lamps emit light in multiple directions)
2. Environmental protection and safety:
a. The LED light source has no ultraviolet, infrared light and other radiation, and can avoid the secondary pollution of mercury overflow from the rupture of the fluorescent tube. The aluminum alloy and PC plastic components are used, and the recycling rate is more than 98.5%. Will not cause harm to the environment.
b. Long lifespan — Use LED light-emitting diodes as light sources (you can choose straw hat heads, piranhas, and patch LEDs as light sources), with a lifespan of 50,000 hours, which is 10 times that of traditional fluorescent tubes.
c. Built-in power supply: the use of isolated power supply scheme, higher safety.
4. Personalized selection:
a. Light transmittance cover is optional: transparent stripe (transmittance rate up to 90%) or diffuser cover (soft light, no glare, transmittance rate up to 80%);
b. Color temperature options: warm white (2700K~4000K), natural white (4000K~5000K), cool white (5000K~6500K)
5. Good heat conduction, effectively guarantee the lamp life
a. As the LED heat dissipation PCB, the aluminum base plate can dissipate heat several times better than FR4 material PCB.
b. The aluminum shell with high thermal conductivity is used as a radiator, which conducts heat several times better than the PC shell.
6. Low maintenance cost-due to the use of LED light-emitting diodes as the light source, there is no need for frequent replacement and maintenance, saving manpower and maintenance costs.
7. There is no double shadow, no vertigo. The LED fluorescent lamp PC tube shell produced by our company has undergone special treatment and the special arrangement of the LED light source to fundamentally solve these two problems.
8. Fast start-up speed-unlike traditional fluorescent tubes, LED fluorescent tubes are faster than traditional fluorescent tubes because they are not started by starters and ballasts.
9. The LED fluorescent lamp is easy to transport. The LED fluorescent tube shell is made of PC material, which has good compression and shock resistance and is convenient to transport. Most of the LED fluorescent tubes on the market use transparent glass tubes, but the light color is not suitable for indoor use and is particularly unfavorable for transportation. The LED fluorescent lights produced by our company The tube is made of high-grade PC plastic, the light color is soft and uniform, and it is convenient to transport and not easy to damage.
use
•Completely replace traditional fluorescent tubes;
• Office buildings, shopping malls, supermarkets, schools, hospitals, hotels, parking lots, urban underground passages, factory workshops, municipal engineering, homes and other lighting fields.
Installation Notes
Installation Notes:
1. Remove the starter and rectifier, and connect the live and neutral wires of the mains power supply to the left and right ends of the bracket respectively.
2. The LED tube has a built-in power supply, the two pins of the G13 interface are short-circuited, and the interfaces at both ends are the same.
After-sales service
1. The warranty period is three years
2. If there is a quality problem found in non-human circumstances within a week, you can exchange the goods
Related certificates
CE-EMC, CE-LVD, CE-EN64721, FCC, ROHS certificate
