Three installation steps of LED workshop lighting high bay light
LED workshop lighting high bay is a lighting tool manufactured with new LED energy-saving technology. Due to its high reflectivity and high power factor, it is accepted by the majority of users. A good lamp requires standardized installation to highlight its advantages. This article tells about LED Installation of factory lighting high bay lights.
1. Determine the installation height of the LED workshop lighting high bay light
According to the lighting environment, because the environment will change the reflection efficiency of the lamp. Generally, the height of the lamp should be more than 5 meters, and the wire should not be close to the shell of the industrial and mining lamp. If conditions permit, when the installation is less than 3 meters, protective measures must be taken to prevent vehicles from touching bump!
LED Factory Lighting High Bay Light
2. LED factory lighting high bay light wiring
The main line to the lamp is connected by flat hard copper wire, and one lamp is installed in 5 rings, and it is evenly linked on the three-phase wire according to the requirements of load balance! For large-density lighting projects, the lamp shell is connected with PE protection wire alone.
3. LED factory lighting high bay light waterproof and low temperature treatment
Choose a high bay light with waterproof function, choose a waterproof transformer, and wrap the lamp chip package with a high temperature-resistant thermal insulation material, which is waterproof and can prevent the damage of low temperature to the light fixture. It is very important to use LED high bay light in harsh conditions!
