UV-C LEDs for UVGI / Disinfection
We are currently stocking UV LEDs for 275 nm in a variety of packages for design and development as well as one complete light source (UV LED module with heat sink, power supply, cooling fan, and power cord) in order to support disinfection efforts for COVID 19, omicron variant, and other UVGI requirements. This is being done in order to fulfil UVGI requirements.
The wavelength of our UVC LEDs is rated as 275 nm (270-280 nm), and they are offered in a variety of power levels and designs to meet your specific needs. Using the following chart of specifications, you can decide whether you want a single, chip-on-board, strip, or complete light source module. Pricing based on volume is available for every item listed in the chart that may be found below. There is also the option of receiving a strip that is longer and has a larger output. The lead time will vary by product and might be anywhere from one to six weeks depending on the item that was chosen and the volume that was needed.
In recent years, light-emitting diodes, or LEDs, have begun replacing UV lamps—such as mercury, xenon, amalgam, and excimer—that have been in use in some settings for decades. Because of recent advancements in UV-LED flux density, stability, and life hours, UV LEDs are now a practical alternative to conventional UV light sources such mercury arc lamps, arch lamps, hot and cold cathode lamps, and grid lamps. UV LEDs are better for the environment than traditional light bulbs since they do not release ozone, do not contain mercury, and consume less power than traditional bulbs. In applications such as germicidal (UVGI) for air, surface, and water cleaning, the utilisation of UV-C LEDs is experiencing tremendous growth.
Note that LEDs with other wavelengths, including UVA and UVB, are also available. These include 310 nm, 365 nm, and 405 nm. Although the minimum order quantity and lead time are subject to change, they normally begin at 25 pieces and two to three weeks. Please provide your wavelength and quantity when contacting customer care in order to receive pricing and estimated delivery times.
Applications of UV LED Technology
UVC LEDs are available from BENWEI for a wide variety of applications and uses. The ultraviolet light emitted by our LEDs is highly effective at destroying pathogenic bacteria, fungus, and viruses. The following is a list of some of the most common contexts in which our products can be used:
Germicidal (UVGI) purification
Purification of the Air
Surface Sterilisation
Purification of the Water
Hospital Sanitization
Get in contact with us today to talk about the requirements you have, and we will do our best to give you with a consultation that is tailored specifically to your requirements.
Features:
● High Wattage uv led light are similar in size and shape to conventional germicidal UV lamps but are capable of operating at higher UV output.
● High Wattage uv led light are widely used in forced air duct systems and water disinfection applications.
● High Wattage uv led light are often found in odor control and photochemical applications.
● Available in Low Ozone and Ozone Producing versions.
Specification:
| Product Name: | High power uv led light |
| Wattage: | 20-40W |
| Color Temperature(CCT): | 365-415nm |
| Type: | UV LED |
| Lifespan (hours): | 30000 |
| Luminous Intensity: | 5000-20000mW |
| Viewing Angle(°): | 60/90 |
| Storage Temperature(℃): | -45 - 85 |
| Input Voltage(V): | 9-15 |
| Application: |
● Photocatalyst ● purification ● Horticulture ● Endoscopy ● Machine Vision ● Scientific Instrumentation |
