What are the precautions for the installation and maintenance of LED panel lights?
1. Installation instructions and precautions:
1. The installation of the product must be a licensed professional electrician.
2. Check the integrity of the product when taking it out of the box.
3. The distance between the product and the flammable material should be at least 0.2m, and the zenith to be installed should have a gap of 2 cm high. The panel lights should not be installed inside the zenith or on the wall with heat source. Separate high-voltage electrical wiring.
4. The wiring on the panel light can be passed through the drill hole and the wiring behind the lamp can be fixed with wire clips, to ensure that the fixing is firm.
5. Make sure that the power cord of the lamp has sufficient length and is not subjected to tension or tangential force. Avoid excessive pulling force when installing the connection of the lamp, and do not make the connection knot. The output connection should be distinguished, and should not be confused with other lamps.
6. After installation, connect the low-voltage plug of the panel light with the low-voltage plug of the switching power supply.
7. Non-professionals are not allowed to disassemble and repair. Our company has the right to disassemble and repair the products without replacement or warranty services.
2. Precautions for safe use:
1. Can only be used outside the package.
2. Before use, it is necessary to confirm whether the product is damaged during transportation. If it is damaged, it cannot be installed and used.
3. If you try to repair it yourself, it can only be repaired by professional engineers.
4. Keep the material away from children to prevent children from suffocating when playing with them! The small accessories of the product may cause children to swallow it. Do not let children touch live equipment.
5. Look directly at the light-emitting surface of the LED panel light for a long time, and do not use the reflected LED light to illuminate other people's eyes.
6. Keep away from open flames or high temperature objects.
7. If the service life is exceeded, it needs to be re-maintained and inspected, or scrapped.
3. Maintenance precautions:
1. Before cleaning the lamps, please be sure to turn off the power.
2. Please use a dry or drier rag to clean.
3. Do not use chemical or corrosive things to clean.
