What are the tips for debugging the LED street light system?
The debugging of street lights in the installation process is very important, so LED street lights can be used in the system debugging process, and the technical description of LED street lights in system debugging is explained, and the debugging of LED system is explained. LED street lamp manufacturers ED street lamps have much higher light color rendering than high-pressure sodium lamps. The color rendering index of high-pressure sodium lamps is only about 23, while the color rendering index of LED street lamps is more than 75. From the perspective of visual psychology, it can reach the same brightness and the illuminance of LED street lamps is average. It can be reduced by more than 20% compared with high-pressure sodium lamps. Low maintenance cost of LED street lights: Compared with traditional street lights, the maintenance cost of LED street lights is extremely low. After comparison, all input costs can be recovered in less than 6 years. The LED street lamp has an automatic control energy-saving device, which can achieve the greatest possible reduction in power and energy saving under the condition of meeting the lighting requirements of different periods. It can realize computer dimming, time period control, light control, temperature control, automatic inspection and other humanized functions.
Before installing and lifting the LED street light, the battery must be tested to determine whether the light can be lit, so as to avoid being discovered after the lifting is completed, and increasing the cost of installation and commissioning. What are the skills in this process?
1. Time control function setting. According to the design of daily lighting time, the time control point is set according to the instructions of the controller. The lighting time every night should not be higher than the design value, and can only be equal to or less than the design value.
2. Light control function simulation. If it is during the day, after wiring, according to the delay time mentioned in the controller manual, opaque materials can be used to completely block the mating surface of the solar cell array (or the cell module wiring on the controller is removed) (usually 5min), after After the corresponding time, whether the lamp can automatically light up. If it can be lit, it means that the light control function is normal. If it cannot be lit, it means that the light control function is invalid. It is necessary to recheck the controller settings.
Here are instructions on how to use LED lights when entering the site. If you have any questions, please feel free to contact us and we will continue to provide you with updates.
Benwei Solar Street Lights Outdoor Lamp
Product Features:
>LED light, solar panel, lithium battery and controller,all in one compact design.
>No wiring,100% solar powered ,easy to install and ship.
>Built-in infrared sensor,can adjust the light output automatically(time control + light sensor control+ motion sensor control).
>Rust-proof, dustproof and waterproof IP65.
>5 years warranty.
