Knowledge

Home/Knowledge/Details

What is the difference between LED flood light and LED flood light

1. LED flood light


LED floodlights, also known as spotlights, projection lights, spotlights, etc., are mainly used for architectural decorative lighting and commercial space lighting. The reason for heat dissipation should be considered, so its shape is still somewhat different from that of traditional floodlights.

LED flood light classification:


Rotational and symmetrical shape: The luminaire adopts a rotationally symmetric reflector, and the axis of symmetry of the light source with rotationally symmetric light distribution is installed along the axis of the reflector. The iso-intensity curves of such lamps are concentric circles. When this form of floodlight is illuminated by a single lamp, an elliptical light spot is obtained on the illuminated surface, and the illumination is uneven; but when multi-light illumination is used, the light spots are superimposed on each other, which can produce a satisfactory lighting effect. For example, hundreds of rotationally symmetrical floodlights are commonly used in stadiums, which are installed on high towers around the stadium to obtain high illumination and high uniformity lighting effects.


One Symmetry Plane Row: The luminaire's iso-intensity curve has only one symmetry plane. The luminaire uses asymmetric cylindrical reflectors or symmetrical cylindrical reflectors plus grids that limit light. Typical is the sharp cut-off block retraction light distribution. This kind of light intensity distribution single lamp can obtain a relatively satisfactory illuminance distribution.


Asymmetrical shape: The iso-intensity curve of this type of luminaire has no plane of symmetry. It mainly uses mixed light lamps of different types of light sources with large differences in light intensity distribution and special lamps designed according to the specific lighting requirements of the place of use.


LED flood light features:


At present, the commonly used LED floodlights on the market are basically 1W high-power LEDs (each LED element will have a high-efficiency lens made of PMMA, and its main function is to redistribute the light emitted by the LED, that is, two Secondary optics), there are also a few companies that choose 3W or higher power LEDs because of good heat dissipation technology. It is suitable for large-scale occasion lighting, building and other lighting.


What else should be paid attention to in floodlights?


1. High-purity aluminum reflector, precise beam, good reflection effect.


2. Symmetrical narrow-angle, wide-angle and asymmetric light distribution systems.


3. The light bulb can be replaced by the back opening type, which is easy to maintain.


4. The lamps are equipped with scale plates for easy adjustment of the illumination angle.


The LED flood light is controlled by the built-in microchip. In small engineering applications, it can be used without a controller, and can realize dynamic effects such as gradient, jump, color flashing, random flashing, and gradient alternation. It can also be controlled by DMX. Realize the effect of chasing, scanning and so on. At present, its main application places are probably as follows: single building, exterior wall lighting of historical buildings, interior and exterior lighting of buildings, indoor partial lighting, green landscape lighting, billboard lighting, lighting for special facilities such as medical culture, bars, Atmosphere lighting in entertainment venues such as dance halls, etc.


2. LED floodlights


LED floodlight is a point light source that can illuminate evenly in all directions. Its illumination range can be adjusted arbitrarily, and it appears as a regular octahedron in the scene.


Floodlight is a kind of light source that is widely used in renderings. Multiple floodlights can be used in the scene to coordinate to produce better effects. It illuminates an object evenly in all directions from a specific point, and it is a good analogy to light bulbs and candles. Omnilights can be placed anywhere in the scene.


For example, it can be placed outside the camera range, or inside an object. It is common to use many floodlights of different colors at a distance in a scene. These floodlights can cast and blend shadows on the model. Due to the large illumination range of the floodlight, the illumination effect of the floodlight is very easy to predict, and this kind of light has many auxiliary uses. For example, if the floodlight is placed close to the surface of the object, it will be produces bright light.


It should be noted that the floodlights cannot be built up too much, otherwise the renderings will appear dull and dull. Therefore, in the production of the usual renderings, pay more attention to the impact of lighting parameters and layout on the light perception of the entire renderings scene, accumulate more experience, and master the lighting matching skills.


Features of floodlights:


Under low current, the temperature rise of LED floodlight is not obvious. If the ambient temperature is high, the dominant wavelength of the LED floodlight will be red-shifted, the brightness will decrease, and the uniformity and consistency of the light emission will become worse. In particular, the temperature rise of dot matrix and large display screens has a more significant impact on the reliability and stability of LED floodlights. So the heat dissipation design is very important.


Floodlights illuminate objects evenly in all directions from a specific point, and it's a great analogy to light bulbs and candles. Omnilights can be placed anywhere in the scene. For example, it can be placed outside the camera range, or inside an object. It is common to use many floodlights of different colors at a distance in a scene.


These floodlights can cast and blend shadows on the model. Due to the large illumination range of the floodlight, the illumination effect of the floodlight is very easy to predict, and this kind of light has many auxiliary uses. For example, if the floodlight is placed close to the surface of the object, it will be produces bright light.


3. The difference between LED flood light and flood light


The difference between floodlights and floodlights is not only reflected in the visual effect of lighting, but also in the use of floodlights and floodlights.


The difference between floodlights and floodlights is that floodlights cannot be built too much, so that the visual effect will appear dull and dull. In the production, pay more attention to the lighting parameters and the impact on the light perception of the entire rendering scene.


Flood lights need to pay attention to the following: accurate beam, high-purity aluminum reflector, good reflection effect, symmetrical narrow angle, wide angle and asymmetric light distribution system. .


The difference between floodlights and floodlights is also reflected in the illumination range between the two.


Floodlights are also called projection lights, spotlights, spotlights, etc. They are mainly used for architectural decorative lighting and commercial space lighting. They have heavy decorative components and have many styles in modeling design.


A floodlight is a point light source that can evenly illuminate all directions in all directions, and its illumination range can be adjusted arbitrarily. A standard floodlight can be used to illuminate the entire scene.

Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED  manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry, our web: https://www.benweilight.com/.