What is the difference between T5 and T8 LED connector?

When it comes to LED lighting, there are a variety of connector types available. Two common types are T5 and T8 connectors. While they may seem similar at first glance, there are a few key differences between the two.
T5 connectors are typically used for smaller diameter tubes, with an outside diameter of 5/8 inch (or around 16mm). These tubes are often found in under-cabinet lighting or in signage applications. T5 connectors are designed to fit this smaller tube diameter, and may not be compatible with larger T8 tubes.
On the other hand, T8 connectors are designed for larger diameter tubes, with an outside diameter of 1 inch (or around 26mm). These tubes are commonly found in overhead lighting fixtures in both residential and commercial settings. T8 connectors are designed specifically to fit this larger tube diameter and will not fit T5 tubes.
Another difference between T5 and T8 connectors is the number of pins used. T5 connectors typically have 2 pins, while T8 connectors have 4 pins. This means that if you have a T8 tube and a T5 connector, you will not be able to simply swap them out without making modifications to the connector.
In terms of installation, both T5 and T8 connectors are typically simple to install. They usually feature a twist-lock or snap-fit design, allowing the connector to easily secure the tube in place. However, it is important to make sure you are using the right connector for the tube you are using.
When it comes to choosing between T5 and T8 connectors, the decision will ultimately depend on the type of tube you are using. If you have a T5 tube, you will need a T5 connector, and if you have a T8 tube, you will need a T8 connector. Using the wrong type of connector can result in a poor connection or even damage to your lighting fixtures.
In conclusion, while T5 and T8 connectors may look similar, they are designed for different tube diameters and have different pin configurations. It is important to use the right connector for your tube to ensure a proper connection and avoid any potential damage to your lighting fixtures.