What requirements should be met when manufacturing LED street lights
LED street lights are the most widely used street lights so far. Because they are more energy-efficient and cheaper than traditional street lights, they are widely used by us. The production of our LED street lights must meet the following requirements, so as to better meet the needs of users.
1. The conversion rate of light is 17%, (the solar energy per square meter is 1000W, and the actual utilization efficiency is 170W).
2. The current street lamp lens material on the market is an improved optical material, with a transmittance of ≥93% and a temperature resistance of -38 to +90 degrees.
3. LED street lamp lens, mainly used for LED street lamp lens, the spot is rectangular, the material is PMMA optical material, the transmittance is ≥93%, the temperature resistance is -38-+90 degrees, and the anti-UV yellowing rate is 50000 hours. Changes etc.
4. The average illuminance of the road surface illuminance uniformity is 0.48. The spot ratio is 1:2.
5. Comply with the road illuminance. (The actual 1/2 center spot reaches 25LUX, the 1/4 center light intensity reaches 15LUX, the lowest light intensity at 16 meters away is 4LUX, and the overlapping light intensity is about 6LUX.
6. It has very good application prospects in new urban lighting. Dimming depth, and the color and other characteristics will not change due to dimming.
7. Adapt to humidity: ≤95%.
8. Quality assurance: 5 years.
Benwei was established in 2010. At the beginning of its establishment, its main core business was the research and development, production and sales of radiators and housing kits. After years of development and accumulation, it now has its own spraying workshop, die-casting workshop, oxidation workshop, machining workshop, etc. Various processing departments and various advanced production equipment with competitive advantages in the industry
