1209 RGB SMD LED lamp chips, the product size is 3.2x2.7x2.15mm, and the RGB wavelengths are R: 619-625nm G: 518-524nm B: 464-472nm. Red voltage: 1.9-2.2v, green voltage: 2.9-3.3v, blue voltage: 2.9-3.3v. Red brightness: 600-1000mcd, green brightness: 2000-3500mcd, blue brightness: 600-1000mcd. White, red, yellow, green, orange, blue, purple, pink and other colors can be customized. Welding at 260 degrees and within 10 seconds, 1209 LED lamp chips are used in various home appliances, digital, communications, automotive electronics, medical beauty equipment, electronic teaching equipment, urban lighting, lighting, electronic toys, electronic clocks, traffic signs, etc. can be applied.
1206.RGB
The chip is the key factor that determines the quality of the lamp chip, so BENWEI only chooses chips from big brands such as Taiwan Jingyuan and Sanan. We also use high-definition environmentally friendly high-temperature resistant epoxy resin glue to avoid deformation and cracking, and measure the glue to ensure accuracy and density. In order to improve production efficiency, BENWEI also has a number of imported MST automatic wire bonding machines and die bonding machines, and the welding technology and precision have reached the high level in the same industry. At the same time, imported high-precision packaging equipment is introduced to ensure the stability and consistency of products in various production processes and reduce the defect rate of products. It can also conduct relevant performance tests according to the customer's product use environment, such as: light decay test, high temperature aging test, high voltage antistatic test, etc.
Storage conditions of 1209RGB SMD LED lamp chips: The temperature is controlled at 10℃-26℃, the humidity is 40%-65%, and the electrostatic bag is sealed and stored. We need to wear gloves or finger cots when checking the 1209RGB SMD LED lamp chips, the work surface should also be grounded, and the electrostatic bag should be sealed in time to prevent oxidation of the feet. Inspectors check whether the electrostatic ring is normal every day, and pay attention to whether the metal of the electrostatic ring is in close contact with human skin. There are four welding methods for 1209RGB SMD LED lamp chips: manual welding, automatic spot welding, soldering through tin furnace, and wave furnace welding. As the current increases and the temperature increases, its service life will decrease in a certain curve. The use environment of LED lights: the humidity is between 50%-80%, otherwise there will be electrostatic breakdown and high current kill, the temperature is -20 ℃ to 70 ℃.
In reflow soldering, the material is usually soldered no more than 2 times. When soldering by hand, the temperature of the soldering iron should not be higher than 350℃, and the soldering time of each solder leg should not exceed 3 seconds. When using 1209RGB SMD LED lamp chips, it is recommended to use an anti-static wrist strap or anti-static gloves. All BENWEI installations, equipment and machines should be grounded and packed in moisture-proof packaging. SMD products are all vacuum-packed. If customers find any products with air leakage before use, they are prohibited from using them. The company adheres to the business tenet of "pioneering and enterprising, seeking common development, honesty and pragmatism, and focusing on specialization", relying on strong technical force to continuously carry out technological reform and innovation; using a sound quality management system to fully meet customer needs.
1615 two-color
BENWEI specializes in the research and development, production, sales and service of various medium and high-end LED light-emitting diodes. The company's product range is complete, mainly including various specifications/brightness (red, yellow, green, orange, blue, white, purple, pink) LED lamp chips, two-color LED lamp chips, full color, colorful LED lamp chips, backlight Special LEDs, special LEDs for display screens, infrared emission tubes, LEDs with patch, in-line, high-power and other packaging forms, in addition, special types of LED lamp products can be developed according to customer requirements. Product quality and technical indicators have passed ROHS environmental protection testing. Widely used in all kinds of home appliances, digital, communications, automotive electronics, lighting, electronic toys, traffic instructions, medical beauty equipment, urban lighting projects and other related production enterprises.
BENWEI LIGHITNG's 10 pre-sales service systems: 1. Free samples 2. Customized products 3. Supporting services 4. Technical support 5. Stocking on demand 6. Product training 7. Quality assurance 8. Home delivery 9. Standard packaging 10. Common analyze. Six major after-sales service standards: 1. One-stop supporting service 2. Quick problem solving 3. Fast service response 4. Standardized service process 5. Solution-led 6. Personalized customized service.
1209RGB SMD LED lamp product features: low heat generation, high brightness, low light decay (3000 hours average attenuation <2%), instant lighting (less than 100 nanoseconds), excellent static electricity protection, process in line with RoSH standards, etc. .
