Common driving methods and structure types of LED power supplies
LED power supply can be divided into six types of circuit structure:
1) Conventional transformer step-down type: The advantages of this power supply are small, the weight is insufficient, and the power efficiency is also very low, generally 45%~60%, and it is rarely used due to low reliability.
2) Step-down type of electronic transformer: The power structure has low conversion efficiency, narrow voltage range, generally 180~240V, and ripple interference.
3) Capacitor step-down type: This method makes the fluctuation of LED power supply voltage easily affected by power efficiency. It is not suitable for flashing LEDs. Because the circuit is stepped down through capacitors, it flickers during use. The current is large, and it is easy to damage the chip.
4) Resistor step-down type: The power efficiency of this power supply system is very low, and the system reliability is also very low, because the circuit reduces the large interference caused by the grid voltage change through the resistor, which is not easy to stabilize the power supply, and the step-down resistor itself also consumes most of the energy.
5) RCC step-down switching power supply type: The advantages of this LED power supply are that the voltage regulator has a wide range, the power supply efficiency is relatively high, generally 70%~80%, and the application is more extensive. The disadvantage of switching frequency is that it is not easy to control, the load voltage ripple coefficient is poor, and the load adaptability is poor.
6) PWM control switching power supply type: At present, the PWM control mode LED power supply is ideal because the output voltage or current of the switching power supply is very stable. The power conversion efficiency is very high, generally reaching 80%~90%, and the output voltage and current are very stable. Especially suitable for LED street lamp drive power LED power supply consists of four parts: input rectifier filter, output rectifier filter, PWM regulator control part, switching energy conversion part. This circuit has perfect protection measures and belongs to high reliability power supply.

LED power drive modes can be divided into two types:
⑴Constant current type:
①The constant current drive circuit LED is very good, but the disadvantage is that the price is high.
②Although the constant current loop is not afraid of short circuit of the load, the load is completely disconnected.
③ The output current of the constant current drive circuit is constant, and the output DC voltage has a certain range of variation with the size of the load resistance.
④ Limit the number of LEDs used because it must withstand the maximum current and voltage values.
(2) Regulated current type:
① The adjustment circuit determines the parameters, the output is a fixed voltage, and the output current varies with the load.
②Although the voltage stabilizing circuit is not afraid of open-circuit loads, short-circuiting of the loads is strictly prohibited.
③The change of the rectified voltage will affect the brightness of the LED.
④ To make each string drive LED display uniform brightness, it is necessary to add appropriate resistance.
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry, our web:
https://www.benweilight.com/.




