Precautions for installation of clean panel lights:
1. The installation of the product must be performed by a licensed professional electrician.
2. Check the integrity of the product when taking it out of the box.
3. The distance between the product and flammable materials should be at least 0.2m, and the zenith to be installed should have a gap of 2 cm high. LED lamps cannot be installed inside the zenith, or on the wall with heat source. Pay attention to low-voltage electricity. Route it separately from high-voltage electrical connections.
4. The wires on the LED lamps can be passed through the drilling holes and the wires behind the lamps can be fixed with wire clips. Make sure that they are fixed firmly.
5. Make sure that the power cord of the LED luminaire has sufficient length and is not subjected to tension or tangential force. Avoid excessive pulling force when installing the connection of the lamp, and do not make the connection knot. The output connection should be distinguished, and should not be confused with other lamps.
6. After installation, connect the low-voltage plug of the LED lamp to the low-voltage plug of the switching power supply.
7. Connect the tail wire of the switching power supply of the LED lamp to the mains, usually the brown (black) wire is the live wire, and the blue wire is the zero wire.
8. To use the LED dedicated driver for lamps, do not mix with other lamps.
9. Do not tear off the nameplate of the lamp power supply and driver.
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry， our web: 
https://www.benweilight.com/.
