Now that you know how much power you need for your LED light strips to work, the next step is choosing the right power supply. You need to choose a led strip power supply that will use only 80% of its overall power to run the LED tapes.This is important for the longevity of both your power supply and LED strips.
For example, if your LED strip wattage requirement was 19W, you will need a power source that has a minimum output of 25W . This will keep your power supply from getting overheated. Once you have the minimum wattage requirement down, choose one of three options to for supplying power to your ribbon lights:
Sockets or Plug-Ins: You can choose to power your LED by connecting them to the power sockets in your space. You will need a good Desktop LED Power Supply for this. Simply connect one end of the power supply to your LED tapes and the other to the socket to light up your tapes. This is a good option for using LED ribbon lights in homes, smaller spaces, and for task or accent lighting.Sockets or Plug-Ins
Hardwiring: You can connect your LED light strips directly to the power wiring in your space. This is an effective way to power your tape lights, especially if you’re lighting an industrial or commercial space. You will need Aluminum Case LED Power Supply to hard wire your LED tapes and this process is best handled by professionals.Hard wiring
Batteries: You can use batteries to power your LED ribbon lights. This is a good option if you want to power a small accent piece or take your LED lights with you on the go.led strip light with battery
Step 3: Connect LED Strip to Power Supply
After choosing the right power supply, it is time to connect your LED light tapes to it. As mentioned before you can connect your LED ribbon lights to your power supply via power socket or by hard wiring.
If you choose to connect your LED tapes to a socket, there are two ways to do so:
The first is to connect each length of the strip to a single desktop power supply that can then be connected to the socket.
The second is to connect parallel LED ribbon lights together using a wire clip and connecting the wire clip to the socket. Both of these ways will help you light your space without worrying about led strip light voltage drop. You can also use LED light strip plug connectors to connect your strips to power sources directly.
