How about spiral energy-saving lamps? How to buy spiral energy-saving lamps
Spiral energy-saving lamps are a kind of energy-saving lamps. I believe this should be clear to everyone. Energy-saving lamps are a type of choice for the general public nowadays. Because this kind of lamps saves more electricity than traditional lamps, what about spiral energy-saving lamps? What is the method of purchasing spiral energy-saving lamps? Let’s take a look at BENWEI LIGHTING.
Spiral energy saving lamp
How about spiral energy-saving lamps?
Spiral energy-saving lamps are also called energy-saving bulbs. How about spiral energy-saving lamps? There are half-spiral energy-saving lamps and full-spiral energy-saving lamps, which belong to a kind of energy-saving lamps. Generally, an inductive ballast for energy-saving lamps is used to drive fluorescent tubes to emit light. The color temperature is between 2500K and 6800K. We usually call yellow light when the color temperature is 2700K. We call warm light when the color temperature is 4200K. We call white light when the color temperature is 6400K.
Lamp holder: usually use E27, B22, E40 (for high-power energy-saving lamps).
Plastic parts: How about spiral energy-saving lamps on the market? PP (for low-end halogen powder lamps), PC (for mid-range lamps with mixed powder), and PBT (for high-end lamps with three primary colors of flame-retardant materials) are usually used.
Circuit board: generally use 94V0 flame-retardant board.
Spiral tube: full spiral tube, half spiral tube.
Spiral energy saving lamp
How to buy spiral energy-saving lamps:
1. Check the power
Many consumers always use the power of tungsten filament bulbs as a reference when purchasing energy-saving lamps. Because most manufacturers will list the power of the product itself and the contrast luminosity on the package, these are the power of the tungsten bulb. For example: there is a sign of "20W→85W" on the package, which generally means that the actual power of the lamp is 20W.
Second, check the specific parameters
When purchasing energy-saving lamps, the technical parameters of electronic ballasts should also be considered, such as: harmonic content, power factor, and whether filter components are installed or not. Especially in some occasions where energy-saving lamps are used in large areas and in large quantities, it is necessary to select energy-saving lamps with low harmonics, high power factor, and filter parts, and install as many power switches as possible to avoid the problem of simultaneous switching of a large number of energy-saving lamps. The high-voltage pulse of the power grid impacted and caused damage.
3. Light color
Energy-saving lamps on the market are available in white and yellow colors. But most people psychologically feel that white light is colder, while yellow light is relatively warmer. Therefore, this requires everyone to choose according to their own preferences and needs. Of course, the color of the lamps must match the overall style of the home.
Four, lighting test
Nowadays, most shops provide lamp holders for consumers to test, so when you choose, you can try the lamps you choose to make sure that it is operating normally, and observe its brightness. Pay attention to whether the lamp is energized. There is a phenomenon that the normal lighting of the light is affected by the uneven thickness of the phosphor coating.
Spiral energy saving lamp
Let’s stop here for the explanation of the knowledge of how about spiral energy-saving lamps and how to purchase spiral energy-saving lamps. I believe you will know more about it after reading it. The content is for your reference only, and I hope it will be useful to you Helped.
