How to choose the grille lamp size? Precautions for grille lamp installation
The grille light is a light fixture composed of one or more groups of parallel metal grid bars and a frame, in two styles, recessed and ceiling styles. When we choose the grille lamp, the size of the grille lamp can be said to have a lot of attention, which is related to the size and the brightness of the lamp. At the same time, be sure to ensure the safety of future use during installation to prevent danger. So, how to choose the size of the grille lamp? What are the precautions for grille lamp installation? Don't worry, the following Jiuzheng Lighting Network will explain it to everyone. Come take a look.
How to choose grille lamp size
1. Affected by style
There are various sizes and styles of grille lights. People have different choices depending on their consumption. For example, the size of the double-tube grille lamp. Generally speaking, we can choose I type or V type, etc., especially from the perspective of reflectivity. There are often different choices. of. Therefore, only when people choose the lighting of the grille lamp, they must do a strict design and preparation, so that people can enjoy a more decoration effect.
2. It is related to the size of the office space
The size of the grille lamp is different from the size of the office space. Generally speaking, it is often better to choose a fluorescent lamp with a good light source, so that it can further meet the different needs of office workers. If we are from the type In terms of aspect, ceiling-mounted grille lights are used more frequently. This is mainly because this kind of light has a good light effect and can also meet people's needs in this regard. However, there are certain differences in the size of the double-tube grille lamp, so you should pay attention to your choice in the selection.
3. The relationship with material design
There are many exquisite selections of grille lights, especially in terms of material design, mostly cold-rolled plate materials, and this kind of double-tube grille lights is naturally also very expensive, and at the same time, it has undergone special After the processing design, the grille lamp made of this material is more durable, the service life is prolonged, and it can meet the needs of people.
Grille lamp installation matters
1. In order to ensure the safe installation, maintenance and inspection of lamps, please entrust electrical professionals to be responsible. Construction by non-professionals is prone to danger;
2. Do not install the lamps in the places shown. This lamp is specially used for ceiling installation;
3. Do not use it in parallel with the dimmer to avoid malfunction. Do not install above high-temperature objects and humid places
4. Do not use a light source with a power greater than a specific power. Please refer to the power sticker on the product. No matter what the situation, the lamp cannot be covered by thermal insulation pads or similar materials;
5. Make sure that there are 75mm vents around the product. The use of this lamp cannot violate any fire protection regulations. Please cut off the power before maintenance, installation, or replacement of the light source? Make sure that the light source is installed correctly.
6. Remove the grille reflector on the lamp panel. Take care to handle it gently when removing the grille reflector. Do not scratch. Place the lamp body on the reserved ceiling keel. Please pay attention to the position of the four sides when placing it. Let the four sides of the lamp completely rest on the keel bar to prevent the lamp from falling. Note that when the lamp is heavy, please use the wire to hoist the lamp on the ceiling.
7. Pass the power cord through the outlet hole and connect it to the terminal block correctly. Please pay attention to the live wire at the L mark, the neutral wire at the N mark, and the ground wire at the ground mark.
8. Install the light source correctly. When installing the light source, please pay attention to the light source into the lamp holder slot. After hearing a pop, it means that the light source is in good contact with the copper plate of the lamp holder.
9. Tie one end of the strap of the grille reflector into the strap hole of the lamp body to facilitate the subsequent replacement of the light source. Clip the grille reflector into the lamp body? Note that the shrapnel must be in good contact with the grille reflector to avoid the grille The reflector comes off.
10. Turn on the switch and the light is on, and the installation is complete.
The above is the whole content of how to choose the grille lamp size and the installation precautions of the grille lamp. I hope it will be helpful to everyone. I want to know more about lamps and lanterns.
