How to correctly install LED classroom lights
Since middle school students often use their eyes, it is important to pay attention to eye protection. We need to keep our eyes in a comfortable environment, so many classrooms will install special lamps for classrooms to increase the intensity of lighting. The LED classroom light is installed in the classroom according to certain steps, let's take a look at its installation method below!
1. Make sure that the classroom special lamp and all accessories are complete, free from damage, deformation and other defects. If the lamp is damaged, it cannot be installed.
2. There are three ways to install LED classroom lights: embedded, ceiling-mounted and suspended. Before installation, choose an appropriate installation method according to the environment and space.
3. After confirming the installation method, prepare the corresponding tools.
Fourth, the bearing capacity of the fixed parts on the wall and ceiling of the luminaire should match the weight of the luminaire.
5. When installing, the lamps should be far away from flammable materials, and a distance of at least 2 meters should be ensured. Take care to separate the wires from the low voltage and high voltage.
Six. Make sure that the lamp has a long enough power cord and will not be affected by tension or tangential force. When installing, pay attention to distinguish the connecting wires, so as not to confuse other lamps, and the wiring must not be knotted.
Seven. In order to ensure that the electrical connection wires are firmly fixed, the wires at the back can be fixed with wire clamps.
In order to ensure that the classroom special lamps are installed firmly and improve the installation efficiency, the lamps should be installed correctly according to the above steps. After the installation is complete, pay attention to connect the light input end with the switch, and connect the light low-voltage plug with the low-voltage plug of the switching power supply.
