How to install a wall lamp without leaving the inner wall? Do I have to install a wire box for wall lamp installation?
The installation position of the wall lamp is generally above the bed. This is only for bedroom installation. The installation of wall lamps in other spaces also needs to find a suitable position, so how to install the wall lamp without leaving the inner wall? Secondly, does the wall lamp have to be installed with a wire box? Many people will have such questions, Benwei lighting will explain it for everyone below, let's take a look.
wall lamp
How to install a wall lamp without leaving the inner wall?
The wall lamp can be installed with open wires if there is no wire left. If you really want to install a wall lamp to make this layout more complete, you have to hire a more skilled master. After scraping the white wall, I found that there is no place for the wires in the bedroom wall. You can also use a drill or cutting machine to make a small slot on the white surface to bury the wires that need to be taken, and then use plaster to repair it and then paste the wallpaper. It is just more troublesome and costly. Great, everyone might as well consider the floor lamp. If you continue to work on the wallpaper, it is easy to ruin the overall sense, especially the wiring part of the wall lamp. Secondly, the editor of Jiuzheng Lighting Network believes that the installation height of the wall lamp should be slightly higher than the eye level, and the illumination should not be too large. The choice of wall lamp shade should be determined according to the wall color. The wire connecting the wall lamp should be light-colored, so that it can be painted with the same color as the wall to keep the wall tidy. In addition, you can first dig a small slot in the wall that fits into the wire, insert the wire, fill it with lime, and then apply the same paint as the wall.
wall lamp
Do I have to install a wire box for wall lamp installation?
The wall lamp installation does not necessarily require the use of a wire box. It can be directly connected to the live wire of the switch output terminal and the neutral wire of the power supply circuit. Wire laying is divided into two ways: open wire and dark wire. Open wire laying means that the wires are exposed on the surface of the wall. The advantages are simple construction, low cost, easy heat dissipation of the wires, and easy maintenance, but the disadvantage is that it is not beautiful.
Wall lamp is a kind of decorative lamp, usually only installed on the wall, illuminated by soft light, usually installed on the indoor wall for auxiliary lighting, the light of the wall lamp is generally relatively elegant and harmonious, which can embellish the room. Elegant and rich, common wall lamps include ceiling lamps, color-changing wall lamps, bedside wall lamps, mirror wall lamps and so on. For wall lamps, installation is not too difficult, but there are many people who do not understand how to install wall lamps, in fact, we can also learn it by ourselves, so that we can also install wall lamps by ourselves.
First of all, we must determine what kind of wall lamp we are installing, and then determine the location of the installation, so that the installation can begin. The wall lamp installation should be divided into several steps:
1. First of all, combine the wall lamp hanging plate, punch a hole in the appropriate position on the wall to mark, in order to punch expansion screws below.
2. Use an electric drill to drill the marked hole. Before drilling at the same time, pay attention to understand the layout of the wiring to prevent the wire from being drilled.
3. After drilling the hole, you can start to install the expansion screw, and drive the expansion screw into the previous hole. You can use a hammer or other hard objects to drive until all the screws are driven into the wall.
4. Next, use wood screws to pass through the hole of the wall lamp hanging plate, and then fix them on the expansion screws. Pay attention to the two sides of the fixing alternately, so as to avoid the wood screws from shifting.
5. Connect the hanging plate and the ceiling plate with screws, and then fix the ceiling plate firmly with bald screws. After the installation is complete, disconnect the indoor power supply, then connect the wall lamp's wire and the power cord, and install the wall lamp. After the installation steps are described, do you know how to install the wall lamp? It is actually quite simple, as long as you pay attention to some details during the installation process.
wall lamp
I don’t leave the inner wall of the wall, how to install the wall lamp and the wall lamp installation must install the wire box knowledge explanation here, I believe you should have more understanding after reading it, the content is for your reference only, I hope to be right Everyone is helpful.
