How to install ceiling lights, detailed explanation of how to install led ceiling lights
After buying the ceiling lamp, you will suddenly remember that you will not install it. It's troublesome to find an electrician. Then call your husband over. As a man, he still has to fix some miscellaneous repairs at home.
Of course, before installing the ceiling light, you must first know how to install it. Before you start to install it, it is necessary to understand how to install the ceiling light you want to install. If you install the lamp, look back at the manual and find that there is an important link that you have forgotten, it will more or less affect the use of the lamp.
To understand how to install the ceiling lamp, the simplest and rude way is to read the instructions! Generally, ceiling lamps have installation instructions attached, and some are written directly on the packaging box. A closer look should not be difficult to find. Xiaohua recommends that you read the manual, and then install the ceiling lamp according to the installation method on the manual. why? The reason is very simple, each ceiling lamp is different or less, and the corresponding manual is applicable to that lamp. The manual is often more practical than the installation guide you find on the Internet. The manufacturer will also list all installation precautions.
If the ceiling lamp you bought does not have an installation manual, then Xiaohua recommends that you contact the manufacturer and say that the manufacturer may be exaggerated. Ask the boss who sells the lamp. If you buy it online, ask the customer service and let them give a brief introduction. How to install this lamp and what details should be paid attention to.
Under normal circumstances, the installation steps of ceiling lights are similar, the following briefly introduces the installation method of LED ceiling lights:
1. Turn off the power supply switch of the lamp.
This is very important. Safety first. You can turn off the power and do whatever you want. If you don’t turn off the switch, the wires are live and dangerous. It’s not good if you get an electric shock.
2. Open the lampshade, and fix the induction lamp on the wall or ceiling with screws and expansion tubes.
Generally, the lampshade of the ceiling lamp is locked by rotation, pushed in, or fixed by screws. Pay attention to see that it is not difficult to disassemble. The holes in the ceiling are marked out after the chassis is aligned, and then drilled with a percussion drill. The percussion drill is easy to use. You can make a hole at the touch of a switch, but you need to push it forward.
For some ceiling lights, the light source can be removed. If it can be removed, it is best to remove it first. For LED ceiling lights, many light sources are fixed to the chassis, so they cannot be removed. When installing the chassis, be careful not to damage the LED beads.
3. Connect the power supply cord and the power cord of the lamp. First strip off the 5-7mm length of the power supply cord and the lamp power cord, then twist the exposed metal wires together, and wrap them with electrical insulation tape.
Pay attention to the two wires to keep a certain distance, if possible, try not to put the two wires under the same piece of metal to avoid short circuit and danger. If possible, pack more electrical insulating tape.
4. Aim the lampshade at the lamp and buckle on the lamp, push it in firmly, and fix the lampshade on the lamp.
If the lampshade is fixed by screws, align the position of the lampshade and fasten the screws. As for the lampshade, which is made of plexiglass or acrylic, these are fragile materials. Be careful when installing and hold the lampshade securely.
Although the installation methods of ceiling lights are similar, Laner still recommends to read the manual. Some LED ceiling lights have special designs, so you may need to pay attention to certain details during the installation process.
