How to install downlights in commercial lighting
Downlight is a kind of lamp that has more condensing properties than ordinary surface-mounted lamps, and is generally used for general lighting or auxiliary lighting.
Downlights mainly provide uniform, comfortable and soft functional basic lighting in commercial lighting. When lighting, they mainly consider the distance between the lamps, the illumination and uniformity of the ground, and the matching degree of the lamps and the ceiling.
Installation of downlight:
Before installing the downlight, please check whether the size of the device hole meets the requirements, whether the connection between the terminal and the power input line is strong, whether the lamp and the device surface can fit flatly, and if there is a gap, please make appropriate adjustments.
When installing the ceiling downlight in the shopping mall, you can open the installation hole in the upper part of the shopping mall according to the required size in advance, and then connect the power cord to the terminal of the lamp. Pay attention to the positive and negative poles. After the wiring is completed, check that the installation is correct. Put the spring card upright, insert it into the mounting hole together with the lamp body, and push it up hard, the LED downlight can be automatically spread in, and the lamp can work normally when the power is turned on.
Notice:
1. When installing the downlight, don't be too close to the wall. The downlight will generate heat when it is illuminating. If it is too close to the wall, the wall will be baked yellow, which will affect the appearance of the interior.
2. Avoid installing this lamp in places with heat sources, hot steam and corrosive gases, so as not to affect its life.
