How to install LED high bay light
LED high bay light is a very important industrial lighting fixture. Due to the flexible installation method, strong illumination, and wide illumination limitation, it is deeply favored by many manufacturers. The main installation methods of LED industrial and mining are: side wall type, hanging type, mobile type. The following LED high bay light manufacturers will introduce to you.
Side wall type: This installation method is suitable for some light industrial workshops, which have relatively low height requirements, simple work content, and relatively high standard degree requirements, which belong to the precision industrial lighting. The advantage of this technique is that it saves power and can meet the lighting requirements with high illuminance.
Suspension type: This installation method is suitable for the lighting of heavy machinery production workshop. Due to the high height of the workshop and the wide range of lighting requirements, hanging installation is selected.
Mobile type: It is mainly used in outdoor factory and mine lighting environment. Since outdoor lighting is some places with very bad conditions, electricity is relatively difficult. Therefore, in order to make up for this deficiency, mobile installation can be selected to meet the ideal lighting requirements. .
LED high bay light
LED high bay lights, also known as LED factory lights, are used in factory workshops, stadiums, toll stations, etc. Because it is a lighting object produced by applying LED energy-saving technology, it has high reflectivity and high power, but good lighting requires standard installation, so as to highlight its benefits. The installation of LED high bay light is as follows:
1. Determine the installation height of the LED high bay light according to the lighting conditions. Since the situation will change the reflection compliance of the lamps and lanterns, the height of ordinary LED high bay light fixtures should be more than 5 meters, and the wires should not be close to the housing of the high bay light. If it is less than 3 meters, anti-corrosion measures should be taken to avoid contact with vehicles.
2. Select a high bay lamp with waterproof function, and wrap the lamp chip package with a high temperature-resistant thermal insulation material, which is not only waterproof, but also prevents low temperature from hindering the environment.
3. From the wiring main line of the LED high bay light to the continuous use of flat hard copper wires for the lamps, one ordinary 5-ring is installed, and it is evenly linked to the three-phase line according to the requirements of load average.
Side wall type: This installation method is suitable for some light industrial workshops, which have relatively low height requirements, simple work content, and relatively high standard degree requirements, which belong to the precision industrial lighting. The advantage of this technique is that it saves power and can achieve large lighting requirements.
Suspension type: This installation method is suitable for the lighting of heavy machinery production workshop. Due to the high height of the workshop and the wide range of lighting requirements, hanging installation is selected.
Mobile type: It is mainly used in outdoor factory and mine lighting environment. Since outdoor lighting is some places with very bad conditions, electricity is relatively difficult. Therefore, in order to make up for this deficiency, mobile installation can be selected to meet the ideal lighting requirements. .
