How to remove the broken ceiling lamp in the bathroom? How to maintain bathroom ceiling lights
In modern society, ceiling lights are very common in our home decoration. Slowly, many families have installed ceilings in the bathrooms. However, after the ceilings are installed in the bathrooms, problems with the ceiling lights will appear for a long time. So how to remove the bathroom ceiling lamp if it is broken? How to maintain the bathroom ceiling lamp? Don't worry, BENWEI will explain it to you, let's take a look.
How to remove the broken ceiling lamp in the bathroom
1. First, when replacing the ceiling lamp, you must unplug the plug, and then unplug the plug on the rectifier. It must not be hard or damage the accessories of the lamp. At this time, just remove the lamp tube and take out the original one. For a good lamp tube, you can plug in the plug of the rectifier with the circlip card. There is only one filament at each end of the lamp.
2. How to remove the bathroom ceiling lamp if it is broken? One thing that must not be forgotten is to disconnect the power before replacing the lamp. It can be said that this is a very important issue. Some people think that just changing a lamp is not a big problem, but Sometimes the problem is in these details. After turning off the power, remember to check what is wrong, so that you can know whether the bulb is broken or the wiring of our lamps is caused by poor connection.
3. After checking the problem, it is time to replace the bulb. First, remove the lamp cover, and then replace it with a new bulb. In fact, it is recommended that you consider buying a special suction cup, so that it is convenient to suck the gusset next to it when replacing the bulb.
4. Because the ceiling lamp specifications are more suitable, you must not use a screwdriver to pry it down when you remove it, because it is easy to distort the original shape when doing so, and it will be more troublesome to install it back then, so try your best Use professional tools to change the lamp.
How to maintain bathroom ceiling lights
1. Maintenance of the heating module
Do not switch the heating module frequently, and make sure that there is no large vibration around during operation, otherwise it will affect the service life of the heating bulb; when it is turned on after a long period of non-use, do a circuit and bulb inspection, first turn it on for 3-5 minutes to see if operating normally. If you encounter problems, please ask professional and technical personnel to overhaul.
2. Maintenance of the lighting module
When using the lamp, try not to switch frequently, because at the moment of frequent starting, the current through the filament is greater than the current during normal operation, which will make the temperature of the filament rise sharply and accelerate sublimation, thereby greatly reducing its service life. In addition, after the lamp has been used for a period of time, the luminous flux will drop significantly, and the lamp will become darker and darker. At this time, pay attention to replacing the new lamp source in time.
3. Maintenance of the ventilation module
The integrated ceiling ventilation fan should not be switched on and off frequently, the oil should be cleaned regularly, and the corrosive chemical solution should not be used during cleaning, otherwise the plastic parts and the outer paint will be easily damaged. Lubricate the motor regularly. When the ventilating fan is reinstalled after cleaning, the fan blade nuts must be tightened to prevent the fan blades from rotating and flying out after the power is turned on and accidents occur.
The above is the explanation of the knowledge of how to remove the bathroom ceiling lamp and how to maintain the bathroom ceiling lamp. The content is for your reference only, and I hope it can be helpful to everyone.
