Installation method of led flat light
1. There are three installation methods for LED panel lights: built-in type, ceiling type and suspension type. First of all, it is necessary to clarify which installation methods are used.
2. Prepare needle-nose pliers, multiple solder wires, AB glue, digital multimeter, etc. in advance.
3. It is also necessary to clarify the specifications and models of the flat panel lights to see if they meet the requirements of chromaticity and quality, whether there is damage, and everything can be installed normally.
4. Fix the light board according to the selected installation method, and then use the electric chrome iron to carry out electric welding, and control the temperature of the electric iron to keep the temperature above 200, and the electric welding can be carried out in just one second. Do not take too long to cause the circuit board to be destroyed.
5. The optical activity of led should be divided, there are positive and negative, long is positive, short is negative.
6. The connection line on the lighting fixture can be fixed from the punch hole and the connection line behind the lighting fixture can be fixed with cable clips, and it is necessary to ensure that it is fixed firmly.
7. Ensure that the power plug of the lighting fixture is of sufficient length, prevent tensile force during installation, and do not need to tie the connection wire. The output connection should pay attention to the difference and do not need to be confused with others.
8. For the rest, just follow the installation instructions for a little bit of installation. Look carefully at the installation instructions first, and then carry out the specific installation after understanding in your heart.
Pay attention to the installation of led flat light
1. The installation of the product must be a certified technical professional welder.
2. Check the consistency of the product when taking it out of the wooden box.
3. The minimum distance between commodities and flammable materials should be ensured, and the installed ceiling should have 2
In the space of centimeters high, the lighting fixtures should not be installed inside the ceiling, or in the corner of the wall with pyrogen. Pay attention to the separation of the bottom pressure and the high-voltage tower connection.
4. The connection line on the lighting fixture can be fixed from the hole according to the connection line behind the lighting fixture with a cable clip, and it is necessary to ensure that it is fixed firmly.
5. It is necessary to ensure that the power plug of the lighting fixture has sufficient length and does not need to be subjected to supporting force or radial force. When installing the wiring of the lighting fixture, prevent excessive tensile force, and it is not necessary to tie the wiring. The output connection should pay attention to the difference, and do not need to be confused with other lighting fixtures.
6. After installation, connect the bottom-voltage power plug of the lighting fixture with the bottom-voltage power plug of the power transformer.
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry， our web: 
https://www.benweilight.com/.
