Installation method of restaurant chandelier
Chandeliers are common lamps in restaurants. This type of lamp is more convenient to illuminate. The lamps in the restaurant only need to provide light during meals. Therefore, the ceiling is the best choice and has a strong decorative effect. Then the restaurant What is the installation method of the chandelier? What are the precautions for the installation of restaurant chandelier? Let’s take a look at BENWEI LIGHTING.
Dining room chandelier
Installation method of restaurant chandelier:
1. Dining Chandelier Installation-Preparation
(1) Material
Prepare construction materials in advance, generally wood, such as different specifications of water, wooden strips, water board; aluminum alloy, there are two kinds of plates and profiles; steel can be divided into three types of steel, flat steel and steel plate.
Plastic, plexiglass board, glass as spacer, exterior decorative veneer and heat dissipation board, copper board. Anodized aluminum panels are used as decorative components.
Other accessories include screws, nails, rivets, finished lamps, adhesives, etc.
(2) Construction tools include pliers, screwdrivers, hammers, electric jig saws, electric hammers, hand bars, rulers, paint brushes, etc.
2. Dining Chandelier Installation-Details
(1) First choose the approximate location of the chandelier installation, use a soft ruler to measure the relevant data, and then organize it, and determine the installation plan of the dining chandelier, avoiding the chandelier or the dark line buried in the ceiling.
(2) Embed iron or wooden bricks in the structural layer. The burying position must be accurate. Do not fix it first. During the installation process, if the data is found to be offset, it can be adjusted in advance to reduce unnecessary workload.
(3) Next, set up transitional connectors on the iron parts and wooden bricks. They must be firmly connected. They can be nailed, welded, and screwed through. After it is finished, check it as a whole, and do not leave any loose parts.
(4) Refer to the manual, connect the boom and sling to the transitional connecting piece, do not connect wrongly, and avoid the prompt points in the manual.
3. Dining Chandelier Installation-Test
(1) After the dining chandelier is installed, check it with eyes first. If there is any abnormality, it can be adjusted appropriately to ensure a neat and generous appearance; if there is no problem, fix the fixed parts of the interface again.
(2) Turn on the power, turn on the switch, if there is no problem, then OK.
Dining room chandelier
Precautions for the installation of restaurant chandelier:
1. When installing multiple chandeliers, pay attention to their location and length layout. While installing the ceiling, install the chandeliers. Based on the ceiling joists, the position and height of the lights can be adjusted.
2. When the suspender comes out of the ceiling surface, you can use the direct method and the method of adding casing pipes. Many masters choose the first method, which is easy to install and can ensure the integrity of the ceiling panel.
3. For hanging cups directly out of the ceiling, it is not easy to align the holes on the surface of the board. The method of installing the hanger first and then cutting off the panel and digging the holes will affect the decorative effect.
Many people will install the chandelier in Italian food because of its installation position. The light source of the chandelier can be adjusted. When dining, it can be adjusted to the appropriate situation, creating a dining environment, and the meal will be more fragrant. The installation process of the dining chandelier is relatively simple, basically clear at a glance. If you encounter problems with the installation of the dining chandelier, you can refer to the above method and then repair it. There are two ways to install the dining chandelier, and the direct method is generally used directly.
