LED light color quality standard and detection
The three primary colors refer to the three colors of red, green and blue. The human eye is most sensitive to these three colors, and most of the colors are synthesized by these three colors in different proportions. Here are two ways to get white light:
1) RGB is white light obtained by mixing three primary colors, or white light generated by monochromatic color mixing;
2) White light is generated by exciting the special phosphor coating emitted by the blue LED;

The so-called blue LED excitation phosphor generation white light technology, to put it simply, is that the phosphor coating with a wavelength of about 450-455nm emitted by the blue light chip is converted into the visible spectrum and converted into visible white light. The blue LED is characterized by the thickness requirements and design technology of the coating. The increase or decrease of the coating thickness has a great impact on the generation of the visible spectrum. The visible spectrum will tend to yellow when the thickness increases.
First, we need to test the light quality of white LEDs. There is a very simple way. We only need a piece of white paper to stick it on the top of the LED beads to see if there is yellow light along the wide angle.
In addition to the design of three primary colors and blue LED technology, for the research and development of light color, the secondary optical design scheme, especially the lens scheme, is carried out to deal with the phenomenon of color separation when dealing with some special light types and small angles. The design principle of the secondary optical lens is to improve the secondary optical device and reduce the color separation of the LED spectrum distribution on its special surface light mixing. From the initial simple frosted surface to textured surface, and then to the current complex RZ mixed surface treatment technology.
Compared with the traditional matte textured surface technology with uncontrollable light path, RZ mixed surface treatment technology can maximize the uniformity of light and color, with fast efficiency and high controllability. The following figure is the schematic diagram of its working principle:

Insiders said that at present, the light mixing effect can be guaranteed to be no more than 70%, and the efficiency of optical equipment made with the new patented light mixing technology can be improved by 90%.
The research on the original light LED technology is still in progress. In the new RZ light mixing surface treatment technology, in addition to breaking through the surface texture design, we also need to reprocess the LED original light obtained after TRI optical design. In addition to not changing the optical application angle of the original tri design, to improve the effective high optical efficiency and ensure the quality of the original LED light, there is still a need to develop and utilize this mixed light surface treatment technology.
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry, our web: https://www.benweilight.com/.




