LED lighting manufacturers introduce the three main points of installing LED lights
In the process of using lighting products, whether the product is easy to use is not only related to quality, but also has a very close relationship with installation. LED lighting manufacturers emphasize that especially for LED products, they should pay more attention to this and the more refined the quality is. The higher the product requirements in these areas. Therefore, when installing LED lamps, pay attention to the following three points.
LED lighting manufacturers introduce the three main points of installing LED lights
1. Confirm the appropriate model and regular product before installation
Before installing LED lights, LED lighting manufacturers remind that it is necessary to confirm that the product meets the requirements of the specification. For example, its model, specifications and other aspects must meet the national standards to ensure that there will be no problems in future use. And LED lighting manufacturers also emphasize that other accessories are also used during installation, so these accessories must be complete and must not be missing or the quality of the accessories must not have any problems and there is no deformation, paint peeling or damage. And so on, we must ensure that the quality has passed the acceptance inspection.
Second, to determine the installation height of the product
If the installation height of LED lamps is less than 2.4 meters, and it is in a relatively large and particularly dangerous place, LED lamp manufacturers emphasize that lamps and lanterns below 36 volts must be used so as to ensure sufficient safety and LED lamps manufacturers remind the surrounding when installing. There can be no combustibles. If the high temperature surface of the lamp is close to combustibles, in this case, some measures for heat insulation and heat dissipation should be taken to avoid safety accidents. LED lighting manufacturers emphasize that when installing lamps outdoors, the height must be more than three meters. If they are installed on the wall, the height should also meet the standard.
3. To take the correct installation method
If the LED lamp is installed in the masonry structure, the LED lamp manufacturer reminds that the accessories should be embedded in advance, but the wooden wedge cannot be used because the fixing effect is not good and the wood is easy to catch fire, which is a safety hazard. At the same time, professional LED lighting manufacturers emphasize that it is necessary to ensure enough firmness and that the accessories should be able to bear the weight of the lamps. At the same time, it should be noted that different fixing measures should be taken for lamps of different weights, so the installation skills should be applied flexibly. To be safe.
The above are the three main points for installing LED lights introduced by LED lighting manufacturers. In addition, it should be noted that if the LED lighting lights or evacuation indicators are installed in public places, there must be very obvious signs so that people can identify them. And high-quality LED lighting manufacturers also recommend that automatic energy-saving switches should be installed in public areas where no one is looking after them.
