LED panel light installation method and structure use introduction
Many customers feel that it is very troublesome to install LED panel lights without on-site guidance. They do not know how to install them, and they are worried that the quality is not very good, so they all buy high-priced products from dealers. We can solve the most fundamental installation problems for you, no matter the customer. Wherever we will teach a complete set of installation techniques, simple and fast.
Ceiling installation method: First make a few screw holes in the ceiling, then install the LED panel light slide-in ceiling frame on the ceiling, and fix three sides. Then slide the panel light into the fixed slide-in mounting frame, and then fix the frame with screws on the fourth side. Convenience and time saving.
Embedded installation method: first install the sheet metal groove on the ceiling, then fix a few brackets protruding outward on the back of the LED panel light, and then put the panel light in, so that the bracket matches the sheet metal groove on the ceiling, then it can be fixed on the ceiling. However, due to the different thicknesses of various ceilings, it is necessary to adjust the height between the lamp surface and the bracket, otherwise the LED panel light will be higher or lower than the ceiling surface after being installed.
Suspension (hoisting, ceiling) installation method: first fix the hanging wire mounting parts on the ceiling, and lock the screws (the hanging wire has been installed at the factory.) The hanging wire goes down vertically and hangs the components on the back of the LED panel light. Easy to install.
LED purification panel light structure:
1. Shell: Made of high-quality aluminum alloy, the surface is specially treated by anodizing and sandblasting, which has the characteristics of anti-corrosion, dust-proof, anti-static, anti-rust, non-stick dust, and easy to clean.
2. Purifying lamp shade: It adopts impact-resistant, anti-aging PS, milky white light is soft, and transparent color has excellent brightness. The product has the characteristics of strong corrosion resistance and high impact resistance. And the product is not easy to change color after long-term use.
3. Electric purification lamp: LED purification panel lamp adopts external constant current regulated power supply, the product has high conversion rate and no stroboscopic.
4. Ceiling installation: The LED purification panel light adopts the ceiling installation method. The LED purification panel light can be fixed with the color steel plate through the screw. The installation site falls into the clean room.
Application of LED panel light: This LED purification panel light is suitable for the pharmaceutical industry, biochemical industry, electronic factory, food processing industry and other areas that need to be purified.
