Sealing of LED Luminaires
Sealing must also be considered for lighting performance in cold weather. Gaskets need to be poured and adjusted to a temperature above 0 °C. It means that sealing is difficult in cold weather when the temperature is below 0 °C. Low temperature may cause the LED luminaire components to deteriorate, exposing the internal component to exposure risk. In addition, it is difficult to obtain proper seal installations in the field due to the low temperature. To solve the problem, the parts of the LED fixtures are advanced sealed at the factory, reducing the need for sealing in cold temperature conditions. Factory sealed, it increases the safety of the electrical parts of the luminaires and simplifies installation.
Electrical Equipment of LED Luminaires
Wire and cable is electrical equipment that transfers electricity to LEDs for lighting. Since LED does not generate much heat, snow and ice can cover LED luminaires in cold weather and cause serious problems in lighting performance. Apart from snow and ice, LED luminaires also face the risk of rain. The factors mentioned earlier have a significant impact on wire and cable. It is recommended to store the cables at a temperature above 10 °C before installation. The intense stress and low temperature of snow, ice, and rain damage the insulation on wire and cable, possibly impeding electrical conduction. Consequently, laying of cables must be done slowly and carefully.
LED Lights can perform well in cold weather. Since LEDs need electricity, not heat, to burn, they work normally in cold weather. In addition, the lumen output of the LEDs is not affected by cold weather. LEDs generate less heat than conventional lighting. The cold air releases stress on the driver and subsequently improves lumen output overall.But the lighting performance of LED lights is not only related to LEDs, but also to the material, sealing and electrical equipment of LED luminaires. Cold weather greatly affects their performance. While the material may be more brittle in cold weather, it is difficult to seal in cold weather. Electrical equipment such as wire and cable are more likely to be damaged by cold weather. You can visit our shop for LED fixtures that are perfectly designed for typically cold areas. Soli Lighting offers LED lighting solutions for harsh weather conditions and cold storage.
