7. All screw terminals should be tightened without loosening and the connection should be reliable. Note that the polarity of the medium components, accumulators, controllers and controllers should not be reversed.
8.Be careful that the wires do not clip to the connection of the lamp pole when threading.Wire connections should be securely connected and wrapped with PVC tape.
9.It is strictly forbidden to smoke or ignite at the installation site, as a small amount of hydrogen is discharged from the storage battery when it is in use, and explosion may occur if open fire is seen.
10. Because each lighting system is a separate unit of work, it is normal to switch the lights on and off slightly differently.
11.Clean the dust on the battery assembly every six months, but do not rinse it from the bottom up with water.
Installation and maintenance: Solar street lamp installation and maintenance must be carried out by qualified companies and technicians.
Product parts: Do not use parts that are not recommended by the manufacturer, otherwise they may cause damage or danger to the system.




