Knowledge

Home/Knowledge/Details

Outdoor Basketball Court LED Lighting Solution for San Francisco Backyard

Outdoor Basketball Court LED Lighting Solution for San Francisco Backyard

Recently, a customer in California contacted the Access Fixtures lighting experts to inquire about outdoor basketball court LED lighting. His goal was to sufficiently light his backyard court but also prevent light spill onto neighboring properties. The court abutted neighboring properties, so the basketball court lights had to be setup in such a way that the neighbors would be unaffected.



The customer gave us the court dimensions of 25’ x 25’. This specific court gave plenty of room to practice free throws, jump shots, and some three-point shot as well. The court was surrounded by fencing of various heights and had a concrete perimeter that designated a proper out-of-bounds area.

An Access Fixtures lighting specialist used the results from a photometric report we recently ran for a slightly larger, 30’ x 35’ outdoor basketball court LED lighting solution. Because the sizes and levels of play on the two courts were so similar, our specialist was able to make slight adjustments to the second court to match the amount of 10 footcandles we achieved for the first court.

A New and Improved Outdoor Basketball Court LED Lighting Solution

The Access Fixtures specialist also considered ways to improve this second outdoor basketball court LED lighting package. Rather than just giving a cookie-cutter recommendation, he considered the pros and cons of the first package as they applied to this second customer.


The first package used 185-watt sports lighters rated for 100,000 hours. While previous customers have been thrilled with this unit, he knew there was another unit in our lineup that could potentially offer increased light, more easily customizable beam spreads, and even a longer lifetime. This second fixture would also be more efficient and would use 19 fewer watts. The design of the first fixture made it better suited for higher mounting heights, whereas the second unit was better suited for lower heights. Knowing how close the neighboring property was, our specialist knew we wouldn’t be able to put the fixtures as high up as we could in the first project