Replacement method of LED roadway light tube
LED roadway lamp is a kind of LED lamp, it can replace T5 fluorescent tube, it is very energy-saving, and the brightness is also very high, and it is widely used in many industries. However, when the LED roadway light tube fails, it is difficult for us to replace the T5 fluorescent tube, because the LED roadway light tube is very thin. So, is there any method that allows us to easily replace the T5 fluorescent tube?
Four ways to replace T5 fluorescent tube with LED roadway light tube
1. Split LED roadway light tube, also known as single-tube LED roadway light tube, for example, 1.2 meters, the length is 1149, the actual length of 1.5 meters is 1449mm, the actual length of 0.6 meters is 549, the plug is G5.3, and it is divided into two kinds. An external power supply, the lamp itself is divided into polarities, if components are added, the polarity can be achieved, the power supply is placed in the bracket, and the bracket needs to be modified. A built-in power supply, the power supply is designed on the aluminum substrate, and the power supply is characterized by narrow voltage. Generally between 200-230v, it can also meet the requirements.
2. T5 integrated LED lamp, this is a combination of lamp and bracket. When installing, you only need to fix the metal buckle. The advantage is that the lamp bracket is saved, the power supply can be built in, and the installation is extremely simple. , the device orientation is also sensitive. Generally new clothes can be considered.
Third, T8 to T5 LED fluorescent lamp, simply put, the body of T8, the plug of T5, and the power supply can also be built-in. The advantage is that the aluminum material is enlarged, the heat dissipation is better, the light-emitting angle is enlarged, and the power supply is built-in. Realize direct replacement of T5 fluorescent lamps.
4. External power supply type, which can directly choose T5 aluminum-plastic tube with a diameter of 16mm, directly connect with the external power supply, and promote the operation of the LED tube to emit light. Note that this kind of lamp has polarity. If it is found that the lamp is not bright, just switch the two ends of the lamp to switch the polarity, and the lamp will light up.
There are three ways to replace the T5 fluorescent tube with the LED roadway light tube, which should be replaced according to the actual situation. Generally, it is better to use the split or T8 to LED roadway light tube. If it is newly installed, the integrated T5 LED fluorescent tube is generally used. This installation method It is flexible, can be mounted or hoisted, and it is also economical in terms of cost.
