The decorative component of the floodlight is heavier
The lamps of the floodlight manufacturers are equipped with a scale plate to facilitate the adjustment of the illumination angle. Its main application places are probably these: single buildings, exterior wall lighting of historical buildings, building interior and exterior lighting, indoor local lighting, green landscape lighting, billboard lighting, medical and cultural and other specialized facility lighting, bars, dance halls, etc. Atmosphere lighting in entertainment venues and so on.
The floodlights produced by floodlight manufacturers have bright colors, good monochromaticity, soft light, low power, long life, and light-emitting time of up to 50,000 hours. In addition, its LED floodlight lamp body is small, easy to hide or install, not easy to damage, no heat radiation, beneficial to protect the illuminated object, and has a wide range of applications. The lamps are equipped with a scale plate to facilitate adjustment of the illumination angle. The LED floodlight is controlled by a built-in microchip. In small-scale engineering applications, it can be used without a controller, and can achieve gradation, jump, color flashing, random flashing, and gradual alternation. Dynamic effects such as chasing and scanning can also be achieved through DMX control.
The floodlight is composed of 3 parts: optical parts, mechanical parts and electrical parts. The optical components are mainly reflectors and light-shielding grids that limit light. The mechanical parts are mainly the housing, and the focusing mechanism for fixing and adjusting the position of the light source, the bracket and the base for fixing the lamp, and the parts with angle indication to adjust the beam projection direction of the lamp.
For most of the closed type floodlights, the mechanical parts also have protective glass and various sealing rings. According to the needs of the use environment, some also have a metal mesh cover. The floodlight with good performance is also equipped with an air filter. The electrical components are mainly ballasts, capacitors, triggers (designed according to the needs of the light source), etc.
