Energy-saving industrial and mining lamps use energy-saving technology to make industrial and mining lamps save power consumption
Energy-saving industrial and mining lamps use energy-saving technology on the basis of traditional industrial and mining lamp technology to save energy consumption and increase illuminance to save investment funds. It can save energy from three aspects: light source + electrical appliances + lamps. Provides the reflection efficiency of industrial and mining lamps. Electrical appliances can use BERSN electronic ballasts with high power factor and low power consumption. The electronic ballasts are small in size and light in weight. Power, the light source can be a high-efficiency energy-saving light source.
The high bay lights of the flood light manufacturers can be divided into general lighting lamps and local lighting lamps according to their bright functions: general lighting lamps are usually evenly arranged on the upper side of the work site or on the side walls to illuminate the entire work surface and require a higher power Incandescent lamps, tungsten halogen lamps, high-intensity gas discharge lamps or a large number of fluorescent lamps. The vast majority of high bay lights fall into this category. Industrial and mining lamp manufacturers
General lighting lamps have higher requirements for light distribution, and two types of light distribution, direct lighting and semi-direct lighting, are widely used, especially the latter. In the semi-direct lighting type, a part of the upward light illuminates the ceiling, which can increase the brightness of the ceiling and create a more comfortable and brighter environment.
Fixing methods of industrial and mining lamps: general lighting lamps have the forms of ceiling, embedded, hoisting (using straight pipe or chain) and suction wall. Movable local illuminators are equipped with corresponding hooks, handles, clamp feet, etc.; fixed local illuminators are generally firmly locked on the working machine with screws or fixing mechanisms.
Local lighting is a kind of lamp that improves the illuminance of a certain working part. Its function can be to strengthen and supplement the lighting on the basis of general lighting, or it can be used as temporary lighting in some places that do not need lighting at ordinary times (such as equipment maintenance and maintenance places). Most of their light distribution is not strictly regulated. Local lighting is usually installed near the work area, using incandescent lamps and tungsten halogen lamps with safety extra-low voltage (≤50V, AC effective value) as the light source.
