The led light bar factory tells you how to install the LED panel light
There are three installation methods for LED panel lights: embedded, ceiling-mounted, and suspended. First, you need to determine what installation method. First, prepare needle-nose pliers, some solder, AB glue, multimeter, etc. Then you need to determine the specifications of the LED panel light to see if it meets the required brightness and quality, and if there is any damage, you can install it without any problems.
For embedded:
1. Remove the gypsum board from the ceiling;
2. Connect the power cord;
3. Put the panel light on the ceiling card position;
4. After the panel light is placed smoothly, it can be powered on and used.
For in-ceiling:
1. Fix the ceiling mount to the ceiling or wall
2. Connect the power cord and place it in a good position
3. Fix the panel light on the ceiling rack
4. After the panel light is placed smoothly, it can be powered on and used.
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry， our web: 
https://www.benweilight.com/.
For ceiling mount:
1. Remove the card holder and install the self-tapping screws into the card holder
2. Fix the card holder on the ceiling
3. Lock the wire card to the card holder
4. Adjust the length of the steel rope, connect the power supply, and you can use it
