Knowledge

Home/Knowledge/Details

The reason for the frequent flickering when using the flat panel light

The reason for the frequent flickering when using the flat panel light

The reasons for the frequent flickering and flickering when using the LED clean panel light:


One: If the LED clean panel light flickers frequently, it may be caused by the overheating of the power supply chip of the LED clean light.


The chip of the driving power supply of the LED clean panel light has a limit of working temperature. If the driving power of the clean panel light is overheated due to overheating, close to a heat source, poor heat dissipation, or the power supply is aging and damaged, it will exceed the working temperature of the power chip. As a result, the drive power supply of the purification lamp automatically enters the protection state, so the clean panel lamp will flash frequently.


Two: If the LED cleaning lamp keeps flashing, it may be because the capacitor of the driving power supply of the cleaning lamp is bad or damaged, which leads to the flashing phenomenon of the cleaning lamp.

LED panel light

Some customers may buy a low-quality LED clean light produced by a small manufacturer in the hope of being cheap for a while when purchasing a clean light.


Poor-quality clean lamp drive power supply can be more than 20 yuan cheaper than good-quality purification lamp power supply.


Three: The input voltage of the LED flat panel purification lamp is too small, which may also cause the purification lamp to flicker frequently.


The user's home voltage is generally 220V. If it is too low, or the voltage is unstable, it may cause the purification lamp to flicker.


First check whether there is a problem with the input voltage of the mains grid, if not, then check whether it is the problem of the clean lamp itself


If the above methods are used and the reason for the flashing of the LED panel purification lamp has not been found, it may also be a problem with the LED strip or circuit of the LED panel lamp.


At this time, the clean panel light must be handed over to professional technicians to analyze the specific reasons. Of course, during the warranty period, it is possible to return the LED clean light to the manufacturer for return or repair.

Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED  manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry, our web: https://www.benweilight.com/.