The usage of the four types sensor led tube
Commonly used Benwei induction led tube: In the absence of people or in a quiet environment, the sleep brightness is not only convenient for monitoring, but also good for sight guidance. When someone passes by, the induction led tube will automatically work, so that the tube will reach full brightness. After the person leaves for a few seconds, it will automatically enter the 2W sleep state. The induction led tube can save more than 90% of energy, and the humanized intelligence will automatically double bright, brighten and smart. Dimming. Different styles of sensor LED tubes not only perform well in terms of energy saving, but also promote environmental protection from the side.
Although the LED tube is easy to use, what are the precautions?
The first, infrared induction led tube, is sensitive to the heat source due to the principle of pyrolysis. Keep away from objects with high heat sources during use. This will shorten the sensing distance. Therefore, do a good job of ventilation for excessively hot ambient temperatures.
The second paragraph is the precautions for the radar sensor LED tube. The radar switch has a longer sensing distance, a wide angle, no dead zone, and can penetrate glass and thin wood. Depending on the power, it can penetrate walls of different thicknesses without being affected by the environment, Temperature, dust, etc. Therefore, any moving objects can be sensed, and unnecessary moving objects can be minimized in use, otherwise, it is easy to trigger by mistake and cause the led tube to work.
The third paragraph, the matters needing attention of the light-sensing led tube, the photosensitive control, according to the external light intensity, to control whether the switch is working, in order to achieve energy saving effect. The sensing distance will not be shortened. Therefore, it must be noted that the ambient brightness is not easy to be too bright, otherwise the light-sensitive LED tube is always dimly bright or not working.
The fourth paragraph, the precautions for the voice-activated induction led lamp, pay special attention, the environment should not be too noisy, otherwise the noise will trigger the voice-activated induction led lamp to always work. If it is not easy to use, you can only change to another style.
Special note: be sure to check the input voltage to be accurate before powering on, and there can be no abnormalities. In the actual installation, it was found that there was a short circuit in the lamp panel circuit, and the input voltage of individual users was too high. The customer always thought that the quality of the led tube was not good, but it was actually a problem in use, and the problem was solved.
