Uses of LED high pole lights and precautions for daily maintenance
Uses of LED high pole lights:
High-pole lights are suitable for outdoor lighting projects such as municipal engineering, highways, overpasses, parking lots, stadiums, freight yards, ports, airports and public leisure squares.
LED high pole light is a kind of lighting used in highways, roads and other places. Beautiful appearance and strong decoration. The lighting area is large, the lighting effect is good, the light source is concentrated, the illumination is uniform, the glare is small, and it is easy to control and maintain.
What matters should be paid attention to in the maintenance of high pole lights?
1. Ensure that the safe power supply of the surrounding environment is cut off.
2. Keep away from the underside of the light board to avoid things on the top during high maintenance.
3. Check the ropes and facilities for failure later.
4. Ensure the safety of maintenance personnel.
When installing, try to avoid the residents' windows too close to the high-pole lights, and consider whether it is environmentally friendly or not.
The lifting of the lamp panel of the high pole lamp is realized by changing the rotation direction of the motor. The lifting system of the lifting high pole lamp drives the lifting of the lamp panel through components such as a motor, a worm gear reducer, a safety coupling, a main wire rope, a secondary wire rope, a rope splitter, and a movable pulley group.
The worm gear reducer has a strong self-locking ability. In order to reduce the gear ratio of the worm gear and the worm gear, and reduce the rising torque, a set of movable pulleys is specially added to make the lifting speed of the lamp panel less than 0.2 m/s.
The main and auxiliary steel wire ropes are made of high-strength, corrosion-resistant 6*19 type non-rotating galvanized steel wire rope.
The lifting pulleys are all made of A3 steel brackets, stainless steel shafts, and copper pulleys that have been hot-dip galvanized to ensure flexible operation without corrosion under normal atmospheric conditions. Various fasteners, washers, clamp rings and other parts are also made of hot-dip galvanized parts or stainless steel.
The lamp panel is equipped with 6 sets of guide pulleys and more than three sets of braking devices. The guide wheels distributed at 120 degrees roll along the surface of the lamp pole during the raising or lowering process of the lamp panel to ensure that the lamp panel does not swing.
The lift-type high-pole lamp is equipped with manual and electric lift control modes, so that the lamp panel can be safely and reliably lowered to 2.5 meters above the ground, which is convenient for maintenance work. The length of the lead wire of the manual remote control device is 10 meters, and the operator controls the lifting of the lamp panel at a distance of 5 meters, which can ensure the personal safety of the operator.
