First, the indoor installation method of LED line lights:
When used for interior decoration, the installation of LED linear lights is very simple. Each Led linear light we wholesale is covered with 3M double-sided tape on the back, with strong self-adhesion. When installing, you can directly tear off the self-adhesive on the surface of the 3M double-sided tape, and then fix the light bar in the place to be installed and flatten it with your hands. The LED line light is a circuit structure composed of 3 LED lamp beads in series and parallel.
2. Outdoor installation method of Led linear light:
The outdoor installation of Led line lights pays more attention to the waterproofness of the light bar and the firmness of the installation. This installation of the LED light wire is mainly because the LED light wire will withstand the wind and rain. If it is fixed with 3m glue, it will reduce the loss of 3m glue in the LED light line for a long time. Outdoor installation often uses this method to fix the card slot, which needs to be cut. And the connection point, when installed indoors, only needs to add waterproof glue to consolidate the waterproof effect of the connection point. Then fix it with a special fixing clip, you can drill with an electric hammer, or you can fix the plastic expansion tube with a screw.
3. Installation method of Led linear light wiring:
The general voltage of LED line lights is AC220V, DC12V and DC24V, so it is necessary to choose a suitable switching power supply. The size of the power supply is determined according to the power of the LED strip and the length of the connection. It should be noted that DC12V and DC24V cannot be connected to AC220V, otherwise all lamp beads will be burned out. DC12V cannot be connected to the control power supply of DC24V; otherwise, the power will be more than doubled, and the lamp beads will be easily burned. The AC220V light strip can be directly connected to the mains. The RGB seven-color LED strip needs to use the controller to achieve the effect of change. Generally, 4 lines are used to distinguish black, red, green and blue. The colorful light bar is generally a common anode.
4. Led line light connection distance:
Generally speaking, the connection distance of 3528 series LED strip lights is longer, which is 20 meters, and the connection distance of 5050 series LED strip lights is longer, which is 15 meters. If the connection distance is exceeded, the Led line light is easy to heat up, which will affect the service life of the Led line light during use. The RGB simple controller has a range of 10 to 15 meters, while the remote control has a range of 15 to 20 meters, and more can control 30 meters. If the Led strip lights are connected at a long distance and the controller cannot control the strips, you need to use a power amplifier for splicing. Therefore, it must be installed in accordance with the manufacturer's requirements.
Before the silicone lampshade needs to be sprayed with oil, we understand the shortcomings of silicone, which is to make up for the shortcomings of the silicone lampshade, so oil injection is required. A feature of extruded silicone chimneys is that the surface is "static". Surface static electricity can lead to active adsorption of dust in the air. Silicone lamp shades are no exception. Over time, dust can cover traffic lights and create shadows on surfaces. A series of problems such as particle movement, as well as the feeling of needing to wipe the dirt frequently, will have a certain impact on the later maintenance. Of course, not only the silicone lampshade, but also the PC lampshade. This is also a puzzling problem for the industry.
Even if the silicone lampshade has so many defects, there are still many manufacturers who like it, because the softness and light transmittance of the silicone lampshade should be better than ordinary materials, and the PC lampshade is a deformation of plastic products, which can make the model product more single, more limited. Big, the silicone lampshade can be made of aluminum, it can be twisted like this, as long as the aluminum profile can be made into the shape of the silicone lampshade!
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry, our web: https://www.benweilight.com/.




