Knowledge

Home/Knowledge/Details

What are the reasons for the LED flood light not to light up?

If the floodlight does not turn on when it was first purchased after a period of use, then this is because the quality of the light source is poor and the light decay is serious. The floodlight will get darker with the use of time. So today, Xiaobian will take you to analyze the reasons why the LED flood light does not light up?


The poor heat dissipation of the flood light source will also cause the light source to decay (that is, it is not bright before) or burn out. In addition, the waterproof of the floodlight is not well done, and the water has entered the lamp, causing the lamp bead to burn out. If the shell is intact, it is still possible to replace the lamp beads, but you need to know the power, current, voltage and other parameters of the power supply, which must be matched with the light source.


Wire solder joints are soldered, resulting in no power supply: The integrated lamp beads in the floodlight are connected to two wires. Check whether the lamp beads have virtual soldering, false soldering, cold soldering, and whether the power input line has loose connection points, open circuits, etc. Is the drive connection cable damaged?


The floodlight is flooded. This is because the waterproof treatment is not done well. Such consequences may cause the light source and power supply to burn. This is basically useless. If you understand better, you can replace the light source and power supply. If necessary, you can contact the manufacturer for after-sales. The main reason is that The quality is off.

Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED  manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry, our web: https://www.benweilight.com/.