The real face of the LED light strip is just like a belt, and it uses an LED light source called LED light strip. It can be lighted directly by connecting to the 220V mains power. It is not difficult to use when it is fixed with a fixing card.
LED light strips were born with the development of LED technology in recent years. When there are no LED light strips, T4 and T5 lamps are used for backlighting, but the smallest size of T4 and T5 lamps is 0.3 meters. , which means that if there is less than 0.3 meters, a dark area will be left, and the LED light strips emit light evenly, and can be cut according to the actual length, which is very convenient, plus red, green, blue, yellow, white, There are so many light colors such as warm white, and even colorful changes. Now basically T4 and T5 tubes are rarely used, and LED light strips are used instead!
Common types: The commonly used types of LED strips are 3528 and 5050 strips (3528 refers to the size of the LED light source, 32mm long and 28mm wide, and 5050 refers to the LED light source length and width are both 50mm), the difference between the two On the one hand, the size is different, on the other hand, there are 3 LED chips in the 5050 lamp bead, while there is only one LED chip in the 3528. Therefore, under the same number of lamp beads, the brightness of the 5050 LED strip is 3 times that of the 3528 LED strip. The power is also three times that, and the price is also a little more expensive.
Regarding power consumption, this involves the issue of electricity bills, and many users are very concerned about this issue. The rated power of the 3528 lamp bead is 0.06W (0.02A*3V=0.06W), while the rated power of the 5050 is 0.18W (0.02A*3V*3=0.18W), because there will be a protection resistor in the circuit. Down, according to 60 lights/meter, the power consumption of one meter of 3528 light strips is about 4W, and that of one meter of 5050 light strips is about 12W. If you install dozens of meters, the power consumption gap is still very large. However, the light strip is mainly used to light the light slot, and it has many decorative features. Therefore, taking into account factors such as power consumption and price, 3528 LED light strips with 60 lights per meter are used more.
Structural composition and installation matters:
1. The LED light strip is generally 100 meters in a roll. When purchasing, according to the length you need, how much to order, these should be told to the seller in advance, and they will usually be cut for you. There are several sections at home, and each section is equipped with a connector, which can be directly plugged into the socket. If you want to cut it by yourself, you need to pay attention that the light strip is usually marked with a special scissors mouth, cut it at the scissors mouth, connect it, and it is ready to use.
2. The structure of the led strip includes lamp beads, circuit boards, wires, glue, resistors and related accessories.
3. There are accessories for the light strip. The accessories generally include a plug (that is, the power supply), a pin (for connection), a fixing card (a plastic clip for fixing the light strip) and a tail plug (a plastic sleeve to protect the tail of the light strip), These accessories are generally delivered by merchants, but they need to be negotiated with the merchants first, so as not to lose them when the time comes.
LED light strips are generally high voltage 220V, so they are wrapped with a thick layer of flame retardant glue. Wires, circuit boards, etc. are generally made of copper. The LED lamp beads determine the life of the light strip. For the sake of electricity safety , You must not choose the inferior quality just because the price is cheap. If you are greedy for a moment, you may get a safety hazard in exchange!
Cut according to the actual length of the light trough at home, assemble it, test it, and then you can install it, fix it with the light strip clip, and then turn on the power supply, and the light strip will turn on.
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry， our web: https://www.benweilight.com/.
