What factors should be considered when purchasing a ceiling fan light? Ceiling fan light installation precautions and maintenance skills
Ceiling fan lamp is also called decorative ceiling fan. It is a perfect combination of lamp and ceiling fan. It has both the decorativeness of the lamp and the practicality of the fan. It is a perfect embodiment of classic and modern. It is indeed the first choice for interior decoration. The ceiling fan lamp products on the market are special Many, the quality is also uneven, what factors should be considered when buying a ceiling fan lamp? What are the precautions and maintenance techniques for ceiling fan lamp installation? Let's follow the editor of BENWEI LIGHTING to find out.
Ceiling fan lights
What factors should be considered when buying a ceiling fan lamp:
1. Size:
The larger the size, the wider the blowing range, but the heavier motor load, the slower the speed, the wind will be reduced; on the contrary, the smaller the fan blade size, the smaller the blowing range, but the motor load is lighter, the speed will be faster, and the wind will naturally be Larger rooms with poor natural air flow or areas with very hot weather should be of a larger size to achieve the appropriate air volume.
2. Height of boom:
Different ceiling heights use different lengths of booms, and not all spaces are suitable for ceiling fan lights. Generally, ceiling fan lights are required to be at least 2.3 meters above the ground after the ceiling fan lights are installed. Below this height is not only unsafe, but also the effect of blowing is not good. .
3. Control method:
(1) Drawstring ceiling fan light:
Most ceiling fan lamp styles are originally equipped with a drawstring control. There are two drawstrings on the ceiling fan, one to control the light and the other to control the position of the fan. The light and the fan do not affect each other and can be installed without additional wiring.
(2) Wall-controlled ceiling fan lights:
The wall control is the controller installed on the wall to adjust the speed and control the light. The speed control knob and the light switch are on the same panel. The light switch can also be installed separately. The wall control of the ceiling fan with light requires three lines to be reserved. .
(3) Remote control ceiling fan light:
Use the remote control to adjust the speed and switch the lights for easy control. Some remotes also have a timing function. You can set the fan timing when you sleep at night. When installing, install the receiver in the top seat. You can install it with just one route without multiple wiring.
4. Style and style:
It mainly depends on which style and color you like. In addition, it must be consistent with the decoration style of the space. Of course, you can also try the popular mismatches. Common ceiling fan lamp styles are mainly simple and modern, European style, Chinese style, pastoral country, etc., generally The living room can choose elegant and cartoon styles for children's rooms. For ladies' rooms, you can choose rich colors such as pink and blue. NBA and football fans are suitable for sports-loving boys. Leaf fans and bamboo woven fans are suitable. Pastoral decoration style.
5. Number of lamp holders:
Whether to bring lights and the number of lights depends on whether there is a need for lighting, but even if there is no need for lighting, a ceiling fan with lights is more beautiful and decorative. If there are no other lights, the living room needs to be bright. Five lamps, dining room and bedroom use three lamps. If there are other lamps, the brightness requirements are not high. Single lamps can be used. Many styles of single lamps have limited W number of bulbs, so they do not light up, and there are lampshades to cover the bulbs. , It's not the exposed type, even less bright.
Ceiling fan lights
The above is a brief introduction about the factors to consider when purchasing a ceiling fan lamp. I believe that after the above introduction, everyone will have a further understanding and understanding of the ceiling fan lamp. Of course, after choosing the ceiling fan lamp, the next step is to install the ceiling fan lamp. Now, what are the precautions and maintenance techniques for ceiling fan lamp installation? Let's take a look at the following introduction:
Precautions and maintenance tips for ceiling fan lamp installation:
1. Matters needing attention when installing ceiling fan lights:
1. When installing the wiring, you must ask an experienced person to operate in accordance with the standard.
2. Before the installation process, check whether the voltage conforms to the ceiling fan light.
3. The switch must be turned off during installation.
4. Determine the place to install the ceiling fan light to ensure that when the fan blade rotates, it will not touch other objects.
5. When drilling holes in the wall, do not damage the wires and other concealed equipment.
6. The screws for fixing the ceiling fan must be able to withstand a pulling force of 16 kg, so as to ensure the safety and reliability of the ceiling fan lamp during operation, and all screw rings must be tightened during the installation process.
7. Do not bend the fork of the fan when doing balancing or cleaning.
8. Please do not install any solid-state circuits or acceleration regulators in the ceiling fan system.
9. Never install the switch of the ceiling fan next to the bathtub or where the shower can reach.
2. Maintenance skills of ceiling fan lights:
1. Wipe with a dry cloth or slightly damp cloth when cleaning. Do not use too much force to avoid changing the balance of the fan blades and causing shaking.
2. In winter, it should be set to reverse to achieve the effect of air conditioning. If it is not used for a long time, the fan blade should be removed and placed in a dry and flat place, and a heavy object should be flattened on the fan blade to prevent the fan blade from deforming.
3. Due to the unequal material quality and the change of humidity, the moisture content of each fan blade is different, which will cause the problem of unequal weight. You can paste some small gaskets and other things until the weight is the same.
4. When the ceiling fan makes a noise when it is running, check whether the screws of each part are loose, and there are vibrations caused by gaps in the connection of the accessories; whether a speed governor that does not match the ceiling fan is installed.
