What problems should be paid attention to when installing led light strips at home?
Basically, the living room of each household is equipped with led light strips. This light strip has the key to changing the light in the room. It is generally installed in the corner of the wall, or in the slot area in the decoration ceiling. . Today, I will give you a detailed introduction to the use of LED light strips. What problems should I pay attention to when installing LED light strips? Let's take a look.
1. LED light strip usage tutorial
1. The first step is to cut the light strip. Each section of the light strip will have a copper node. This place is used as a cutting place. Different specifications of light strips will have different lengths of cutting, such as single cutting, Three lights one cut, six lights one cut, etc. If cutting is carried out in other areas, the route of the light strip will be destroyed, causing the light strip to not be used normally.
2. The connector jack is to insert the tip of the connector needle into the power line area of the light strip, so as to ensure the contact between the needle tube and the wire, and insert it into the middle and low end, so as to ensure sufficient conductivity and convenience. For low-voltage light strips, connect the connector correctly and input the same voltage as the light strip.
3. After receiving the power plug, put the other side of the connector at the connecting point of the light strip to the power plug and insert it. The power cord of the plug can be turned on when it is plugged in. If the light strip does not light up, you can start from the first At the beginning of the second step, close the other end plug inserted into the light strip to the other end plug connected to the power plug, so as to ensure the safety of the power circuit during the entire construction process.
Second, what are the precautions for the installation of LED light strips
1. Pay more attention to the spacing of LED lights when connecting light strips. Generally speaking, the total connection area of LED light strips is 20 meters. In the whole process of application, it will continue to endanger the service life of the LED light strip. Therefore, we must install it according to the manufacturer's regulations. We must not overload the LED light strip to ensure the safety of the application.
2. The method of connecting the control board, the LED light strip and the RGB colorful light strip must first be applied with a professional control board to achieve the unpredictable actual effect of the light. The colorful light strips are generally all common anodized during wiring. , that is, there is one on the light strip with 12V, the others are all negative RGB three negative levels, and the total control area of each wiring control board is inconsistent. Generally speaking, the control distance of a simple control board is Generally, they are all 12 meters long, and the operating range of the remote control panel is generally 20 meters long, and even some can achieve a total area of more than 30 meters.
In general, the installation and use of high-voltage LED strips are relatively simple. When using low-voltage magic strips, you should pay attention to whether the V number of the strip and the voltage is the same, whether the power supply is sufficient, and you need to cooperate with the controller to work normally.
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry， our web: 
https://www.benweilight.com/.
